Air Intake, Tube/Titanium, Filter/Blue, Ford, Mustang, 4.6L V8, Kit

Looking for a quick and easy way to gain an additional 10-14 hp? Look no further than these cold air induction kits from BBK. They feature a fully hand-polished show chrome finish, a long-lasting conical air filter, and an unmatched high-flow design for superior performance and striking good looks. Don't just take our word for it--they can be found under the hoods of thousands of cars from coast to coast.

A sister product to our 57 Series FIPK, our 63 Series Intake Kits or AirCharger® Intakes are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone. They enjoy a faster speed to market than our 57 Series kits due to their pending CARB status. These intakes use only non-metallic rotationally molded tubes that can reduce intake air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow "chain" robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. 63 Series Intake Kits are not legal for street use in some U.S. states.

63-2565 Product Specifications
Product Style: 63 Series Aircharger Kits
Estimated Horsepower Gain: 15.26 HP @ 6000 RPM
Replacement Filter: RF-1048
CARB Exempt: No
Weight: 10.3 lb (4.7 kg)
Product Box Length: 22 in (559 mm)
Product Box Width: 14 in (356 mm)
Product Box Height: 12 in (305 mm)

Gain horsepower and torque with this straightforward upgrade. Lifetime filter can be cleaned and re-oiled, but the big news here is that we've streamlined the airflow in the 05 Mustang to the point that a computer re-flash isn't just an option, it's required! Check out the SCT Xcalibrator - the perfect tool for the job!This kit is supplied with a stainless steel air box with built-in velocity stack and CNC billet aluminum mass air meter. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.

New for 2005! K&N drop in OEM fit air filter from the brand you know and trust. Fits 2005-2006 V6 & GT Mustangs.

The kit is supplied with a stainless steel air box with built-in velocity stack and CNC billet aluminum mass air meter. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out. Our tests showed inlet temps a mere 10 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.

We've found between 16 -20 more rear wheel horsepower with this kit.

If you're the type of person who expects real performance from their performance products then the Airaid intake system is the intake for you. In addition to the premium synthetic fiber air filter, the kit includes a four inch roto-molded, cross-linked polyethylene intake tube and a lightweight, composite cool-air dam that ensure the cool air being pulled in stays cool. This performance proven design has shown a 13 horsepower and 10ft/lbs torque increase at the wheels on Airaid's dyno. Pick-up an Airaid intake system for your Mustang today and start putting down power that ordinary cars can only dream of.

Washable and Reusable Filter!

Features Removable Modular Venturi Technology

Easy to Mount Brackets!

Limited Lifetime Warranty!

13 HP/10 ft lbs Torque

AFE's latest creation is the 2005/2006/2007/2008 Mustang GT Stage 2 Cold Air Induction system. Using their advanced filter technology and a low restriction filter housing and intake tube, gains of 19 hp and 22 ft/lbs of torque were recorded! The specially shaped intake tube and correctly positioned MAF sensor will not throw a check engine light so NO SPECIAL TUNING IS REQUIRED. To rebutt all those "stories" out there, Stangnet has done a technical article and product review:

AFE Mustang Air Intake Tech/Review Article

The brushed aluminum cover blocks out engine heat and attenuates intake noise. The washable filter is large for increased airflow and dust holding capacity. No drilling required! The rugged powder coated heat shield resists corrosion and uses factory mouting points.

Fits: 2005 / 2006 / 2007 / 2008 Mustang 4.6L V8

Dyno-tested to deliver more horsepower and torque.
AEM Synthetic Dryflow Brute Force air intakes are specifically designed for large-displacement engines and are dyno-tested to deliver more torque and horsepower than any other intake system on the market. They're constructed from CNC mandrel-bent 6061 aluminum and feature reinforced TIG-welded brackets and fittings for maximum durability. Each system is tuned to be application-specific. For superior filtration, AEM utilizes an extra-large, proprietary, synthetic Dryflow element that reduces restriction without compromising filtering capability. AEM also includes a heavy-duty stainless steel heat shield, a complete hardware kit, and installation instructions. .
AEM Synthetic Dryflow Brute Force air intakes are specifically designed for large-displacement engines and are dyno-tested to deliver more torque and horsepower than any other intake system on the market. They're constructed from CNC mandrel-bent 6061 aluminum and feature reinforced TIG-welded brackets and fittings for maximum durability. Each system is tuned to be application-specific. For superior filtration, AEM utilizes an extra-large, proprietary, synthetic Dryflow element that reduces restriction without compromising filtering capability. AEM also includes a heavy-duty stainless steel heat shield, a complete hardware kit, and installation instructions.

Specifications:

Fits: 2005 / 2006 / 2007 / 2008 Mustang 4.0L V6

Dyno-tested to deliver more horsepower and torque.
AEM Synthetic Dryflow Brute Force air intakes are specifically designed for large-displacement engines and are dyno-tested to deliver more torque and horsepower than any other intake system on the market. They're constructed from CNC mandrel-bent 6061 aluminum and feature reinforced TIG-welded brackets and fittings for maximum durability. Each system is tuned to be application-specific. For superior filtration, AEM utilizes an extra-large, proprietary, synthetic Dryflow element that reduces restriction without compromising filtering capability. AEM also includes a heavy-duty stainless steel heat shield, a complete hardware kit, and installation instructions. .
AEM Synthetic Dryflow Brute Force air intakes are specifically designed for large-displacement engines and are dyno-tested to deliver more torque and horsepower than any other intake system on the market. They're constructed from CNC mandrel-bent 6061 aluminum and feature reinforced TIG-welded brackets and fittings for maximum durability. Each system is tuned to be application-specific. For superior filtration, AEM utilizes an extra-large, proprietary, synthetic Dryflow element that reduces restriction without compromising filtering capability. AEM also includes a heavy-duty stainless steel heat shield, a complete hardware kit, and installation instructions.

Specifications:

UPR's new line of Designer Valve Stem Caps are shaped like our Designer Door Pins to give your ride that show car classy Billet look. We made these Designer Valve Stem Caps to match our door pins exactly for anyone that likes to have multiple products that match each other on their ride. Machined from 6061-T6 Billet Aluminum to give you the highest quality finished product available.

Comes in sets of 4. Available in satin or polished finish.

Ships to anywhere in the 48 States for $5.00.

Here's a handsome bit of bling for the cockpit of your Mustang, window switch bezels precisely machined from billet aluminum. Make your selection based on the factory interior in your car.   For Leather Door Trim.