Fast Mustang Parts

American Thunder Exhaust: 05-10 Mustang GT 4.6L

2005-2007 Ford Mustang GT except Shelby; (2) 5 inch x 10 inch mufflers with 4" stainless steel tips.

FREE SHIPPING WITHIN 48 STATES!

Xtreme System: 05-10 Ford Mustang GT, Axle-Back

Ultimate Touring System: 05-10 Ford Mustang GT, Dual Rear

Crossover Pipe: 05-10 Ford Mustang GT, 2.5"

Sport Exhaust: 05-10 Ford Mustang GT, Pro Tips

Performance Exhaust System: 2005-06 Mustang GT Axle-Back with 4 in. Pro-Series Tips

LIMITED LIFETIME WARRANTY

K&N Performance Gold Oil Filter (96-10 GT, 96-04 Cobra, 05-10 V6

K&N Performance Gold Oil Filter

(96-10 GT, 96-04 Cobra, 05-10 V6, & 07-10 GT500)

K&N Mustang Drop-In Replacement Air Filter (05-09 GT, 05-10 V6)

K&N Mustang Drop-In Replacement Air Filter

(05-09 GT, 05-10 V6)

K&N Mustang Drop-In Replacement Air Filter

K&N 2010 Mustang GT Drop-In Replacement Air Filter

Diablosport Trinity T-1000 Dashboard Monitor and Tuner

2010 Mustang V6, GT, and Shelby GT500 Diablosport Trinity T-1000 Dashboard Monitor and Tuner

Predator Tuner: 2010 Ford Mustang V6/V8/GT-500

Stage 2 Nissan 300Z TT Water Methanol Injection Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

This Snow Performance kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers. The most suitable are the centrifugal supercharged and turbocharged engines, as they build boost is a more progressive manner concerning water-methanol injection. The positive displacement blower engines will work, but it might take more work to dial in the delivery. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit. Now with Lifetime Warranty - please see details.

Kit includes:

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• Digital Variable Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Comprehensive Instructions

*NOTE* Dual Nozzle Upgrade (#40004) required for dual plenum intake manifold.

Click here to find out: Why Purchase a Snow Performance Water Methanol Injection Boost Cooler?

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle (THIS UPGRADE IS REQUIRED FOR THE 300Z)

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 1 Water Methanol Injection Boost Cooler N/A Kit

Free Shipping! Ask us about our additional 5% off discount!

The Snow Performance gasoline Stage 1 Boost Cooler N/A kit is available for naturally aspirated applications that don't utilize a MAF sensor. Operation is very simple, the system starts injecting when the vacuum switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again. This makes it a good choice for naturally aspirated cars looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, etc.

Note - Safe Injection can not be used with Stage 1 Systems

Click here to find out: Why Purchase a Snow Performance Water Methanol Injection Boost Cooler?

Don't forget about these optional upgrades:

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 2 Buick Grand National Water Methanol Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

This Snow Performance kit is for Buick Grand Nationals utilizing a 30-150 Hz MAF output signal. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from the mass air flow sensor. Perfect for the fast spooling Grand National turbo. More power over a wider range and better drivability is the result.

Kit includes:

• 150+ PSI High Volume Pump
• 2 Quart Reservoir
• Digital Variable Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Comprehensive Instructions

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Cortex Programmer 04-07 Dodge 4.7L Trucks

Cortex Programmer 03-08 Cummins Ram Trucks

Cortex Programmer 04-08 Hemi Ram Pickups

Cortex Programmer 05-08 Dodge Charger Magnum Hemi

Cortex Programmer 05-08 Chrysler 300C Hemi

Tirepaq 04-08 Hemi Gas Cars

Tirepaq 04-08 Hemi Gas Trucks

Tirepaq 98-08 Dodge Ram Diesel

Flashpaq Tuner 1998-2001 5.2L Ram

Flashpaq Tuner 1999-2003 4.7L Jeep Grand Cherokee

Flashpaq Tuner 1998-1999 5.2L Dakota & Durango

Flashpaq Tuner 1998-2002 3.9L Ram, Dakota & Durango

Flashpaq Tuner 1998-2003 5.9L Ram, Dakota & Durango

Flashpaq Tuner 2000-2007 4.7L Ram, Dakota & Durango

Flashpaq Tuner 2003-2008 5.7L Hemi Ram Pickup

Cortex Programmer 99-08 GM Cars

Cortex Programmer 99-08 GM Gas Trucks SUVs

Cortex Programmer 2006-2007 Cadillac Escalade

Cortex Programmer GM 01-08 GM Diesel Truck

Flashpaq Tuner Corvette 99-03 5.7L LS1 LS6

Flashpaq Tuner Camaro Z28 Firebird T/A 99-02 5.7L LS1 LS6

Flashpaq Tuner Corvette GTO CTS-V 2004 5.7L LS1 LS6

Flashpaq Tuner Cadillac CTS-V 2005 5.7L LS6

Flashpaq Tuner Corvette 2005 6.0L LS2

Flashpaq Tuner Corvette 2006 6.0L LS2

Flashpaq Tuner GTO 05-06 6.0L LS2

Flashpaq Tuner GM Truck SUV 01-07 8.1L

Flashpaq Tuner GM Truck SUV 96-00 5.0L 5.7L 7.4L

Flashpaq Tuner GM Truck SUV H2 (F) 99-04 4.8L 5.3L 6.0L

Flashpaq Tuner 2500 3500 SeriesTruck (New Body) 2007 6.0L

Flashpaq Tuner 2500 3500 SeriesTruck (Classic) 05-07 6.0L

Flashpaq Tuner 1500 Truck, SUV & H2 05-07 4.8L 5.3L 6.0L

Flashpaq Tuner Escalade & Denali 06-07 6.2L

Flashpaq Tuner 1500 Pickup Truck 2006 4.3L

Flashpaq Tuner for 2002-2007 GM 6.6L Duramax

Flashpaq Tuner for 2001 GM 6.6L Duramax

Cortex Programmer 04-07 Freestar

Cortex Programmer 99-08 Navigator

Cortex Programmer 99-08 Explorer

Cortex Programmer 04-05 Excursion

Cortex Programmer 99-08 Powerstroke Pickup

Cortex Programmer 04-08 Rangers Mazda PU

Cortex Programmer 99-08 F-Series V8 Gas

Cortex Programmer 99-08 Expedition

Cortex Programmer 05-08 Mustangs

Tirepaq 04-07 Ford V6 V8 V10 Truck / SUV

Tirepaq 99-07 Ford 6.0L 7.3L Powerstroke

Flashpaq Tuner 05-09 Ford Mustang 4.6L 5.4L

Flashpaq Tuner 05-09 Ford Mustang 4.0L V6

Flashpaq Tuner 04-08 Mazda Pickups

Flashpaq Tuner 99-06 SUVs

Flashpaq Tuner 04-08 Rangers

Flashpaq Tuner 99-08 F-Series

Flashpaq Tuner 6.4L Ford Powerstroke Diesel

Flashpaq Tuner Truck & SUV 99-03 7.3L

Flashpaq Tuner Truck & SUV 03-07 6.0L

Superchips MicroTuner Crown Vic/Town Car 96-03

Superchips MicroTuner Mercury Marauder 2003

Superchips MicroTuner Mustang and Cobra 96-03

Superchips MicroTuner Crown Vic/Town Car

Superchips MicroTuner Mercury Marauder 2004

Superchips MicroTuner Mustang and Cobra 2004

Superchips MicroTuner Mustang 2004 3.9L

Cortex Programmer 04-07 Dodge 4.7L Trucks

Tirepaq 04-08 Hemi Gas Cars

Flashpaq Tuner 05-08 300C Charger Magnum 5.7L HEMI

Flashpaq Tuner 1998-2001 5.2L Ram

Flashpaq Tuner 07-08 Dodge 6.7L Cummins Diesel

Flashpaq Tuner 98-08 Dodge Diesel Trucks

Cortex Programmer 99-08 GM Cars

Flashpaq Tuner Corvette 99-03 5.7L LS1 LS6

Tirepaq 96-08 GM Gas V8 Trucks SUVs

Flashpaq Tuner GM Truck SUV 01-07 8.1L

Flashpaq Tuner 07.5-08 GM 6.6L Duramax LMM

Tirepaq for 02-07 Chevy GM Duramax

Flashpaq Tuner for 2002-2007 GM 6.6L Duramax

Max MicroTuner 01-02 GM Truck, SUV 4.3L V6

Cortex Programmer 04-07 Freestar

Superchips MicroTuner Crown Vic/Town Car

Tirepaq 04-07 Ford V6 V8 V10 Truck / SUV

Flashpaq Tuner 05-09 Ford Mustang 4.6L 5.4L

Flashpaq Tuner 04-08 Mazda Pickups

Flashpaq Tuner 6.4L Ford Powerstroke Diesel

Flashpaq Tuner Truck & SUV 99-03 7.3L

Superchips MicroTuner Crown Vic/Town Car 96-03

Nozzle, 625 ml/min

Nozzle, 375 ml/min

Nozzle, 225 ml/min

Nozzle, 175 ml/min

Nozzle, 100 ml/min

Nozzle, 60 ml/min

Nitro Booster 8oz

Boost Juice, Case of 4 gal

Pump Fittings (elbows and bushings)

150 Pump Outright

150 Pump Outright (metal casing 4.5" long)

220 Pump UPGRADE

3 Wire Harness Assembly for VC100uc

4 Wire Harness for VC Series controllers

MPG MAX UPGRADE (with nozzle and controller, etc)

Stage III Diesel Controller MPG MAX

Stage III Diesel Controller

Stg 3 Gas Controller

VC MAF Universal

VC-A10 Controller

VC-100uc Upgrade in kit

VC-MAF/25 Combo

Red Tubing/foot

Red LED

Amber LED

Green LED

Hobbs Switch (65 psi)

Hobbs Switch (30 psi)

Hobbs Switch (15 psi)

Boost Switch

Vacuum Switch

Union Junction

Union Tee

Nozzle Holder

Bulkhead Fitting

Nozzle Mounting Bung for Steel

Nozzle Mounting Bung for Aluminum

Nozzle Mounting adapter for hose

Solenoid Upgrade (fluid flow)

Carb Plate

Dual Nozzle Upgrade

Level Switch Upgrade Unmounted

7 Gallon Reservoir (w/ bracket, solenoid & hose) (15Lx17Hx9W)

2.5 Gal (9.3L) Reservoir (13Lx9.5Hx7.5w)

3 Qt Reservoir

3 Qt Reservoir (9"Lx10"hx4"W - including tabs)

Supercharger Bypass Valve Kit (3-way solenoid)

Electronic Boost Controller Relay w/ Harness

Wastegate Solenoid

Safe Injection Flow Gauge, Blue

Safe Injection Flow Gauge, Red

Safe Injection

Diesel Stg III MPG MAX Universal

Diesel Stg III MPG MAX 6.0 Powerstroke

Diesel Stg III MPG MAX 7.3 Powerstroke

Diesel Stg III MPG MAX Duramax

Diesel Stg III MPG MAX Cummins

Diesel Stg III Universal

Diesel Stg III 6.0 Powerstroke

Diesel Stg III 7.3 Powerstroke

Diesel Stg III Duramax

Diesel Stg III Cummins

Diesel Stg II Hobbs

Diesel Stg II Universal

Diesel Stg II 6.0 Powerstroke

Diesel Stg II 7.3 Powerstroke

Diesel Stg II Duramax

Diesel Stg II Cummins

Diesel Stage I

Diesel Stage I Universal

Stage 3 MPG MAX Water Methanol Injection Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

The Snow Performance MPG MAX® Stage 3 Boost Cooler® is unmatched for increases in Fuel Economy AND Power in water-methanol injection systems. Key to this is accuracy and adjustability designed into the system. This Boost Cooler® can be used on ANY EFI engine (naturally aspirated or forced induction) and any forced induction application (EFI or Carbed).

In the lighter load states, it can read and inject according to either EFI Fuel Injector Pulse-width or Boost level, or any combination of BOTH! This allows it to be extremely accurate when injecting smaller amounts to prevent quench.

Additionally, the MPG MAX® Has the software and hardware capable to inject the correct amounts under the higher load states for serious increases in power.

Very easy to set up and dial in - the software creates a 3 dimensional delivery map from just a few easy to set start and full points you punch in.

The LCD Screen displays boost pressure, Injector Pulse width %, as well as water-methanol injection percent. Quick, easy, positive adjustments are made with 2 push buttons. Low profile design allows for easy-to-view and discrete mounting.

Kit includes:

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• LCD Screen, Pushbutton Digital Variable 3D Mapping Controller
• 3 Nozzles To Cover a Wide Range of Horsepower
• 10 feet High Pressure Tubing (1200psi burst)
• Flow Control Solenoid
• Dual Nozzle upgrade included
• All Required Hardware Needed For Installation
• Comprehensive Instructions

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 3 Water Methanol Injection Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

The Snow Performance Stage 3 Boost Cooler® is unmatched for accuracy and adjustability in water-methanol injection systems. This system can be used on ANY EFI engine - naturally aspirated or forced induction, and any forced induction application.

It can read and inject according to either EFI Fuel Injector Pulse-width or Boost level, or any combination of BOTH!

Extremely easy to set up and dial in - the software creates a 3 dimensional delivery map from just a few easy to set start and full points you punch in.

The LCD Screen displays boost pressure, Injector Pulse width %, as well as water-methanol injection percent. Quick, easy, positive adjustments are made with 2 push buttons. Low profile design allows for easy-to-view and discrete mounting.

Kit includes:

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• LCD Screen, Pushbutton Digital Variable 3D Mapping Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• 10 feet High Pressure Tubing (1200psi burst)
• Comprehensive Instructions
• Comprehensive Instructions
• All Required Hardware Needed For Installation
• Comprehensive Instructions

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Snow Performance Stage 2 VW 2.0 FSI Turbo Boost Cooler

Snow Performance Authorized Master Distributor We will beat any authorized dealer price shipped!

This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers. The most suitable are the centrifugal supercharged and turbocharged engines, as they build boost is a more progressive manner concerning water-methanol injection. The positive displacement blower engines will work, but it might take more work to dial in the delivery. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit. Now with Lifetime Warranty - please see details.

Kit includes:

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• Digital Variable Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Comprehensive Instructions

Click here to find out: Why Purchase a Snow Performance Water Methanol Injection Boost Cooler?

Free Shipping within the 48 States.

Stage 2 Cobalt SS Water Methanol Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

This Snow Performance kit is specifically for the Chevy Cobalt SS. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from the mass air flow sensor. Designed for use with the Cobalt SS Eaton supercharger. More power over a wider range and better drivability over the typical boost actuated system.

Now with Lifetime Warranty - please see details.

Kit includes:

• 150+ PSI High Volume Pump
• 2 Quart Reservoir
• Digital Variable Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Comprehensive Instructions

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Snow Performance Stage 2 VW 1.8 Turbo Boost Cooler

Snow Performance Authorized Master Distributor We will beat any authorized dealer price shipped

Tired of your factory SMIC heat soaking? Want to push your 1.8T without the fear of detonation? Get better IAT reduction and detonation control with this new 1.8T-specific kit. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from your factory Mass Air Flow sensor. This offers accurate injection for small, quick spooling turbos. Enjoy more power over a wide range with smooth, seamless delivery.

Kit includes:

• Digital MAF referenced controller
• 150+ psi pump for the most in pressure and volume
• Bulkhead fitting required to tap into factory washer reservoir
• 8 feet of tubing
• 2 nozzles to cover a wide range of horsepower
• All required hardware needed for installation
• 1.8T specific instructions for ease of installation

*NOTE: 3qt reservoir is not included in this kit.

Click here to find out: Why Purchase a Snow Performance Water Methanol Injection Boost Cooler?

Free Shipping within the 48 States.

Stage 2 Subaru WRX Water Methanol Injection Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

This Snow Performance kit is for Subaru WRX’s utilizing the stock 0-5 volt output MAF sensor. Also works on STi’s. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from the mass air flow sensor. More power over a wider range and better drivability is the result. 20% increases in Horsepower typical.

Kit includes:

• Digital MAF referenced controller
• 150+ psi pump for the most in pressure and volume
• Bulkhead fitting required to tap into factory washer reservoir or factory trunk mounted intercooler sprayer reservoir
• 20 feet of tubing
• 2 nozzles to cover a wide range of horsepower
• All required hardware needed for installation
• WRX/STi specific instructions for ease of installation

*NOTE* 3 qt reservoir is not included in this kit. It is recommended that a Solenoid Upgrade (#40060) be used in any application that utilizes a trunk mounted reservoir

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 2 Dual Carb Roots Blower Water Methanol Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

This Snow Performance kit is just for dual-carburetor roots-supercharged engines. This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit. Now with Lifetime Warranty - please see details.

Kit includes:

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• Digital Variable Controller
• 4 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Two Carb Spacer Plates
• Dual Nozzle Upgrade
• Solenoid Valve
• Comprehensive Instructions

Don't forget about these optional upgrades:

Safe Injection

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 2 Roots Blower Water Methanol Injection Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

This Snow Performance Boost Cooler is just for single-carburetor roots-supercharged engines. This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit. Now with Lifetime Warranty - please see details.

Kit includes:

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• Digital Variable Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Carb Spacer plate
• Solenoid Valve
• Comprehensive Instructions

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 2 Neon SRT-4 Water Methanol Injection Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

This kit offers a huge increase in power in the SRT-4 by delivering the appropriate and maximum amount of fluid over a wide range of engine conditions. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from manifold pressure. This allows more to be injected at higher rpms and loadings when more fluid can be utilized. More power over a wider range and better drivability is the result. 20% increases in horsepower typical.

Kit includes:

• Digital boost referenced controller
• 150+ psi pump for the most in pressure and volume
• Bulkhead fitting required to tap into factory washer reservoir
• 8 feet of tubing
• 2 nozzles to cover a wide range of horsepower
• All required hardware needed for installation
• SRT-4 specific instructions for ease of installation

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 2 Mitsubishi EVO Water Methanol Injection Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

Click here to find out: Why Purchase a Snow Performance Water Methanol Injection Boost Cooler?

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 2 Water Methanol Injection Boost Cooler N/A Kit

Free Shipping! Ask us about our additional 5% off discount!

This Snow Performance naturally aspirated kit uses a progressive controller that proportionally injects more or less according to manifold vacuum. Start and full points are adjustable for engagement and delivery curve, to match what the engine requires. High compression modified engines can gain performance through cooler intake charges and the large increase in octane and detonation suppression. It can also be geared towards fuel economy and using lower grades of gasoline.

Kit includes:

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• Digital Variable Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Comprehensive Instructions

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 2 GM MAF LF Water Methanol Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

This Snow Performance kit uses the unique LOW frequency Hz output signal on many GM vehicles from 1986-1993. Perfect for naturally aspirated and forced induction applications that build boost quickly at lower rpms. This allows for the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. Now with Lifetime Warranty - please see details.

Kit includes:

• 150+ PSI High Volume Pump
• 2 Quart Reservoir
• Digital Variable Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Comprehensive Instructions

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 2 GM MAF Water Methanol Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

This Snow Performance kit uses the unique GM MAF frequency Hz output signal (on most 1994 and new GM vehicles) instead of 0-5 volts. Perfect for naturally aspirated applications and forced induction applications that build boost quickly at lower rpms. This allows for the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. Now with Lifetime Warranty - please see details.

Kit includes:

• 150+ PSI High Volume Pump
• 2 Quart Reservoir
• Digital Variable Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Comprehensive Instructions

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 2 MAF Water Methanol Injection Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

This Snow Performance kit uses the 0 to 5 Volt output signal from the Mass Air Flow sensor on many fuel injected vehicles. This means that any vehicle with a MAF (with a 0-5V output signal) can use this kit, whether they are naturally aspirated or forced induction. If the application is forced induction, it can be used with very fast-spooling turbos, or positive displacement blowers. It is easier to set up with the positive displacement blowers with a MAF signal because it is more progressive in nature vs. the boost pressure signal on those applications. This allows for the most accurate injection possible over the widest range. The result is the most power and driveability possible. Now with Lifetime Warranty - please see details.

Kit includes:

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• Digital Variable Controller
• 2 Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
• Comprehensive Instructions

Click here to find out: Why Purchase a Snow Performance Water Methanol Injection Boost Cooler?

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 2 Water Methanol Injection Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

Click here to find out: Why Purchase a Snow Performance Water Methanol Injection Boost Cooler?

Don't forget about these optional upgrades:

Safe Injection

Solenoid Upgrade for post throttle body or carb installation, or trunk mount reservoirs.

Dual Nozzle Upgrade to mount an additional nozzle

Low Level Indicator

2.5 Gallon Reservoir for more range

Boost Juice

Carb Adapter Plate

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Stage 1 Water Methanol Injection Boost Cooler Kit

Free Shipping! Ask us about our additional 5% off discount!

The Snow Performance gasoline Stage 1 Boost Cooler™ kit is available for forced induction applications that are either fuel injected or carbureted. Operation is very simple: the system starts injecting when the boost switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again. This makes it a good choice for low to medium boost setups looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, etc. Now with Lifetime Warranty - please see details.

Kit includes:

• 150+ PSI High Volume Pump
• 3 Quart Reservoir
• 2 Nozzles To Cover a Wide Range of Horsepower
• Required Hardware Needed For Installation
• Comprehensive Instructions

Note - Safe Injection can not be used with Stage 1 Systems

Click here to find out: Why Purchase a Snow Performance Water Methanol Injection Boost Cooler?

FREE SHIPPING WITHIN THE 48 STATES. WE ALSO SHIP THIS PRODUCT TO CANADA. PLEASE CONTACT US.

Mustang Cherry Bomb Glasspack Muffler 2 inch I/O 22 inch Body

Glasspack Muffler

2" Inlet/Outlet: angled 7°

Body Length: 22" (28" overall)

The sound of Cherry Bomb Glasspack Mufflers is as American as apple pie. They feature a straight-through design that is not for the faint of heart. Constructed from 100% welded, aluminized steel with a high-temp red finish, these mufflers are designed to be reversible for ease of installation. Sold individually.

Mustang Cherry Bomb Turbo Muffler 2.5 inch I/O 13 inch Body

2.5'' Inlet/Outlet Diameter

Single Wrapped

3.25'' x 7.75'' Oval

13'' Body Length (17'' Overall)

Cherry Bomb's Turbo Mufflers are for those who want a quieter aftermarket exhaust sound. The reverse-flow design allows for maximum installation flexibility while offering a deep, yet mellow exhaust tone. Made from 100-percent mechanically locked aluminized steel. Mufflers are sold individually.

Mustang Cherry Bomb Turbo Muffler 2.25 inch I/O 13 inch Body

2.25'' Inlet/Outlet Diameter

Single Wrapped

3.25'' x 7.75'' Oval

13'' Body Length (17'' Overall)

Mustang Cherry Bomb Turbo Muffler 2 1/4 inch I/O 13 inch Body

2.25'' Inlet/Outlet Diameter

Single Wrapped

3.25'' x 7.75'' Oval

13'' Body Length (17'' Overall)

Mustang Cherry Bomb Turbo Muffler 2 inch I/O 13 inch Body

2'' Inlet/Outlet Diameter

Single Wrapped

3.25'' x 7.75'' Oval

13'' Body Length (17'' Overall)

Mustang Cherry Bomb Turbo Muffler 2 inch

2'' Inlet/Outlet Diameter

Single Wrapped

3.25'' x 7.75'' Oval

13'' Body Length (17'' Overall)

99-04 Mustang Cobra Stainless Steel 1 3/4 inch Header System

Fits: 1999 / 2000 / 2001 / 2002 / 2003 / 2004 Ford Mustang Cobra

1999-2004 Mustang 2 Valve and 4 Valve owners now have something to cheer about. American Racing Headers now has long tube header systems for you. Made with the same dedication to quality as all ARH systems, these 2 Valve and 4 Valve header systems will deliver the goods.

Features:

• Manufacturered entirely using U.S. made 304 S/S
• 100% leak free one piece long tube design
• 1-3/4" primaries with 2-1/2" collectors
• Merge collectors with scavenger spikes standard
• 3/8" thick flanges with tig welded and hand ported inlets
• Direct bolt-in catted.
• Ultra high flow 200 cell metallic substrate cats.
• Excellent fit with a relatively easy install.
• Postitioned wide in engine compartment to allow easy trans removal.
• Outstanding HP and Torque gains throughout the RPM range.

SPECIAL ORDER: ALLOW 4-6 WEEKS FOR DELIVERY List $1421.00

SHIPS AT DISCOUNTED SHIPPING RATE (35LB RATE)

99-04 Mustang GT ARH Stainless Steel 1 3/4 inch Header System

Fits: 1999 / 2000 / 2001 / 2002 / 2003 / 2004 Ford Mustang GT

SPECIAL ORDER: ALLOW 4-6 WEEKS FOR DELIVERY List $1421.00

SHIPS AT DISCOUNTED SHIPPING RATE (35LB RATE)

1999-2004 Mustang 8.8 28 Spline Rear Axle Kit 5 Lug

Fits: 1999 / 2000 / 2001 / 2002 / 2003 / 2004 Ford Mustang with 8.8 inch rear axle

High strength alloy is double heat-treated to produce these heavy-duty axles that are up to 35% stronger over stock. Exclusive 10-Year manufacture warranty. Shafts come complete with both passenger and driver side shafts, bearings, seals and wheel studs.

Specifics:

Axle Splines:	28
Axle Material:	1541H alloy steel
Wheel Stud Pattern:	5 x 4.50 in.
Wheel Stud Type:	1/2 in. press-in
Wheel Studs Included:	Yes
Bearings Included:	Yes
Seals Included:	Yes
Quantity:	Sold as a kit.

1994-1998 Mustang 8.8 28 Spline Rear Axle Kit 5 Lug

Fits: 1994 / 1995 / 1996 / 1997 / 1998 Mustang with 8.8 inch Rear Axle

Specifications:

Axle Splines:	28
Axle Material:	1541H alloy steel
Wheel Stud Pattern:	5 x 4.50 in.
Wheel Stud Type:	1/2 in. press-in
Wheel Studs Included:	Yes
Bearings Included:	Yes
Seals Included:	Yes
Quantity:	Sold as a kit.

1979-1993 Mustang 8.8 28 Spline Rear Axle Kit 4 Lug

Fits: 1979 / 1980 / 1981 / 1982 / 1983 / 1984 / 1985 / 1986 / 1987 / 1988 / 1989 / 1990 / 1991 / 1992 / 1993 Ford Mustang

Specifications:

Axle Splines:	28
Axle Material:	1541H alloy steel
Wheel Stud Pattern:	4 x 4.25 in.
Wheel Stud Type:	1/2 in. press-in
Wheel Studs Included:	Yes
Bearings Included:	Yes
Seals Included:	Yes
Quantity:	Sold as a kit.

1979-1993 Mustang 8.8 28 Spline Rear Axle Kit 5 Lug

Fits: 1979 / 1980 / 1981 / 1982 / 1983 / 1984 / 1985 / 1986 / 1987 / 1988 / 1989 / 1990 / 1991 / 1992 / 1993 Ford Mustang

Specifications:

Axle Splines:	28
Axle Material:	1541H alloy steel
Wheel Stud Pattern:	5 x 4.50 in.
Wheel Stud Type:	1/2 in. press-in
Wheel Studs Included:	Yes
Bearings Included:	Yes
Seals Included:	Yes
Quantity:	Sold as a kit.
Notes:	When converting to the 5 x 4 1/2 in. bolt pattern, brake drums/rotors and wheels will need to be changed to accommodate this upgrade.

1986-1995 Mustang 5.0L Street Fuel Rail System (Complete Kit)

Fits: 1986 / 1987 / 1988 / 1989 / 1990 / 1991 / 1992 / 1993 / 1995 Ford Mustang 5.0L / 302 V8

With this complete, 5.0 Street Rail System, you replace the OE fuel rails and regulator with the Aeromotive High Flow Fuel Rails and remote-mount, boost reference, adjustable regulator. The system connects without cutting any of the original equipment fuel lines, using the included adapters. All the necessary SS braided lines, fittings with O-rings, AN hose-ends and complete installation instructions are included.

Specifications:

Fuel Rail Material:	Aluminum
Fuel Rail Finish:	Red anodized
Fittings Included:	Yes
Hardware Included:	Yes
Quantity:	Sold as a kit.
Notes:	Kit includes a fuel pressure regulator that adjusts from 35 to 70 psi.

1986-1995 Mustang 5.0L V8 Red Billet Fuel Rails (pair)

Fits: 1986 / 1987 / 1988 / 1989 / 1990 / 1991 / 1992 / 1993 / 1995 Ford Mustang 5.0L / 302 V8

These Aeromotive billet fuel rail kits' flow-through design helps eliminate hydraulic fluctuation. The fuel rails are red anodized for corrosion resistance and feature -8 AN high pressure ports. These billet fuel rails have a 5/8 in. i.d. through-hole, which provides flow capabilities to support 2,000+ hp racing applications.

Specifications:

Fuel Rail Material:	Aluminum
Fuel Rail Finish:	Red anodized
Fittings Included:	No
Hardware Included:	No
Quantity:	Sold as a pair.

Ford Mustang 5-12 PSI Adjustable Fuel Pressure Regulator

Fits: Appropriate for all year Mustangs

Specifically designed for carbureted street or racing engines, these adjustable regulators offer higher flow, quicker response and less pressure creep than competing two-port designs. Ideal for dedicated nitrous applications. These regulators are used by many of the NASCAR® teams.

Specifications:

Fuel:	Gasoline/Alcohol
Pressure Range (psi):	5-12
Regulator Style:	Non-return
Regulator Location:	Inline
Boost/Vacuum Reference Port:	No
Gauge Port:	Yes
Mounting Bracket Included:	Yes
Fittings Included:	No
Rebuildable:	Yes
Inlet Quantity:	Single
Inlet Attachment:	Female threads
Inlet Size:	3/8 in. NPT
Outlet Quantity:	Dual
Outlet Attachment:	Female threads
Outlet Size:	3/8 in. NPT
Regulator Material:	Aluminum
Regulator Finish:	Clear anodized
Quantity:	Sold individually.

Ford Mustang A1000-6 Injected Bypass Fuel Regulator

Fits: Appropriate for all year Mustangs

These Aeromotive A1000-6 injected bypass regulators were developed for high-horsepower EFI applications where -6 AN fuel lines are used for supply and return. These regulators are alcohol compatible and feature two -6 AN inlet ports and one -6 AN return port. They're beautifully finished with Type II bright red and clear anodized coatings and deliver long life, performance, and reliable operation.

Specifications:

Fuel:	Gasoline/Alcohol
Pressure Range (psi):	30-70
Regulator Style:	Return
Regulator Location:	Inline
Boost/Vacuum Reference Port:	Yes
Boost/Vacuum Rise Ratio:	1:1
Gauge Port:	Yes
Mounting Bracket Included:	Yes
Fittings Included:	No
Rebuildable:	Yes
Inlet Quantity:	Single
Inlet Attachment:	Female threads
Inlet Size:	-6 AN
Outlet Quantity:	Single
Outlet Attachment:	Female threads
Outlet Size:	-6 AN
Return Attachment:	Female threads
Return Fitting Size:	-6 AN
Regulator Material:	Aluminum
Regulator Finish:	Clear anodized
Quantity:	Sold individually.
Notes:	Boost reference fitting accepts 1/8 in. hose. Fittings not included.

Ford Mustang A1000 Injected Bypass Fuel Regulator

Fits: Appropriate for all year Mustangs

Intended for use with custom fuel rails, these true billet A1000 injected bypass regulators are specifically designed for use with Aeromotive's A1000 fuel pumps. These alcohol-compatible regulators are beautifully finished with Type II bright dip red and black anodized coatings.

Specifications:

Fuel:	Gasoline/Alcohol
Pressure Range (psi):	30-70
Regulator Style:	Return
Regulator Location:	Inline
Boost/Vacuum Reference Port:	Yes
Boost/Vacuum Rise Ratio:	1:1
Gauge Port:	Yes
Mounting Bracket Included:	Yes
Fittings Included:	No
Rebuildable:	Yes
Inlet Quantity:	Dual
Inlet Attachment:	Female threads
Inlet Size:	-10 AN
Outlet Quantity:	Single
Outlet Attachment:	Female threads
Outlet Size:	-10 AN
Return Attachment:	Female threads
Return Fitting Size:	-6 AN
Regulator Material:	Aluminum
Regulator Finish:	Red anodized
Quantity:	Sold individually

Ford Mustang A1000 Series Electrical External Fuel Pump

Fits: Appropriate for all year Mustangs

This is the pump that started it all. Durable, reliable, good looking and it supports high horsepower. Perfect for the daily driver that doesn't run like a daily driver.

Fuel Injected Engines:
up to 1300 HP - naturally aspirated
up to 1000 HP - forced air induction

Carbureted Engines:
up to 1500 HP - naturally aspirated
up to 1200 HP - forced air induction

Specifications:

Free Flow Rate:	600 lbs./hr.
Maximum Pressure (psi):	90 psi
Inlet Size:	-10 AN
Inlet Quantity:	Single
Inlet Attachment:	Female threads
Outlet Size:	-10 AN
Outlet Quantity:	Single
Outlet Attachment:	Female threads
Quantity:	Sold individually.
Notes:	Fully submersible for custom, in-tank placement. O-ring fittings are required.

2005-2008 Mustang GT AEM Brute Force Air Induction Kit

Fits: 2005 / 2006 / 2007 / 2008 Mustang 4.6L V8

Dyno-tested to deliver more horsepower and torque.
AEM Synthetic Dryflow Brute Force air intakes are specifically designed for large-displacement engines and are dyno-tested to deliver more torque and horsepower than any other intake system on the market. They're constructed from CNC mandrel-bent 6061 aluminum and feature reinforced TIG-welded brackets and fittings for maximum durability. Each system is tuned to be application-specific. For superior filtration, AEM utilizes an extra-large, proprietary, synthetic Dryflow element that reduces restriction without compromising filtering capability. AEM also includes a heavy-duty stainless steel heat shield, a complete hardware kit, and installation instructions. .
AEM Synthetic Dryflow Brute Force air intakes are specifically designed for large-displacement engines and are dyno-tested to deliver more torque and horsepower than any other intake system on the market. They're constructed from CNC mandrel-bent 6061 aluminum and feature reinforced TIG-welded brackets and fittings for maximum durability. Each system is tuned to be application-specific. For superior filtration, AEM utilizes an extra-large, proprietary, synthetic Dryflow element that reduces restriction without compromising filtering capability. AEM also includes a heavy-duty stainless steel heat shield, a complete hardware kit, and installation instructions.

Specifications:

Tube Color:	Polished
Tube Material:	Aluminum
Filter Color:	White
Filter End Cap Finish:	Black
Quantity:	Sold as a kit.

2005-2008 Mustang V6 AEM Brute Force Air Induction Kit

Fits: 2005 / 2006 / 2007 / 2008 Mustang 4.0L V6

Specifications:

Tube Color:	Polished
Tube Material:	Aluminum
Filter Color:	White
Filter End Cap Finish:	Black
Sleeve Color:	Black
Quantity:	Sold as a kit.

2007 Mustang Shelby GT500 Ignition Super Coil

Fits: 2007 Ford Mustang Shelby GT500

Ford 4.6L/5.4L modular 4 valve direct fire. These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15% more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity.These are direct plug replacement for OEM coils. They feature bodies and/or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).

Specifications:

Coil Wire Attachment:	Female/Socket
Coil Style:	Coil pack
Primary Resistance:	0.620 ohms
Coil Internal Construction:	Epoxy
Turns Ratio:	66:1
Secondary Resistance:	5.6K ohms
Mounting Bracket Included:	Yes
Coil Wire Included:	No
Ballast Resistor Included:	No
Coil Color:	Yellow
Coil Shape:	Round
Quantity:	Sold individually.
Notes:	Fits 4-valve engines only.

2003-2004 Mustang Mach 1 Ignition Super Coil

Fits: 2003 / 2004 Ford Mustang Mach 1

1997-04 Ford 4.6L/5.4L modular 4 valve direct fire. These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15% more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity.These are direct plug replacement for OEM coils. They feature bodies and/or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).

Specifications:

Coil Wire Attachment:	Female/Socket
Coil Style:	Coil pack
Primary Resistance:	0.620 ohms
Coil Internal Construction:	Epoxy
Turns Ratio:	66:1
Secondary Resistance:	5.6K ohms
Mounting Bracket Included:	Yes
Coil Wire Included:	No
Ballast Resistor Included:	No
Coil Color:	Yellow
Coil Shape:	Round
Quantity:	Sold individually.
Notes:	Fits 4-valve engines only.

1997-2004 Mustang Cobra Ignition Super Coil

Fits: 1997 / 1998 / 1999 / 2001 / 2003 / 2004 Ford Mustang Cobras

Specifications:

Coil Wire Attachment:	Female/Socket
Coil Style:	Coil pack
Primary Resistance:	0.620 ohms
Coil Internal Construction:	Epoxy
Turns Ratio:	66:1
Secondary Resistance:	5.6K ohms
Mounting Bracket Included:	Yes
Coil Wire Included:	No
Ballast Resistor Included:	No
Coil Color:	Yellow
Coil Shape:	Round
Quantity:	Sold individually.
Notes:	Fits 4-valve engines only.

1998-2004 Mustang GT Ignition Coil

Fits: 1998 / 1999 / 2000 / 2001 / 2002 / 2003 / 2004 Mustangs

1998-04 Ford 4.6L/5.4L/6.8L modular 2 valve direct fire. These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15% more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct plug replacements for OEM coils. They feature bodies and/or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).

Specifications:

Coil Wire Attachment:	Female/Socket
Coil Style:	Coil pack
Primary Resistance:	0.660 ohms
Coil Internal Construction:	Epoxy
Turns Ratio:	61:1
Secondary Resistance:	6.1K ohms
Mounting Bracket Included:	No
Coil Wire Included:	No
Ballast Resistor Included:	No
Coil Color:	Yellow
Coil Shape:	Round
Quantity:	Sold individually.
Notes:	Fits 2-valve engines only.

1984-1998 Mustang EEC-IV Super Coil

Fits: 1984 / 1985 / 1986 / 1987 / 1988 / 1989 /

1990 / 1991 / 1992 / 1993 / 1994 / 1995 / 1996 / 1997 / 1998

Increase throttle response, idle quality & starting with ACCEL's Ford EEC-IV Super Coil. E-core design maximizes energy and voltage output. A direct bolt & plug-in replacement for use with computerized ignition and Ford TFI distributor.

Specifications:

Coil Wire Attachment:	Male/HEI
Coil Style:	E-core
Primary Resistance:	0.200 ohms
Coil Internal Construction:	Epoxy
Maximum Voltage:	48,000 V
Turns Ratio:	132:1
Secondary Resistance:	8.8K ohms
Mounting Bracket Included:	No
Coil Wire Included:	No
Ballast Resistor Included:	No
Coil Color:	Black/Yellow
Coil Shape:	Square
Quantity:	Sold individually.

1987-1993 Mustang Coupe Rear Window Louver

1987/1988/1989/1990/1991/1992/1993 Ford Mustang Coupe

Get retro with these brand new rear window louvers for the 1987-1993 Ford Mustang. These awesome louvers will fit all models of the 1987-1993 Ford Mustang Coupe. They are black in color and could be painted to match the body color of your car. Want to clear your rear window? Louvers attach with thumb screws for easy removal. Everything you need to install is included. Louvers come with very detailed instructions.

FEATURES:

DURABLE RATTLE FREE CONSTRUCTION

HIGH IMPACT, FADE RESISTANT, ABS PLASTIC

STAINLESS STEEL HARDWARE

READY & EASY TO PAINT TO MATCH YOUR COLOR

Ships via FEDEX OS2

1979-1993 Mustang Fastback Rear Window Louver

1979/1980/1981/1982/1983/1984/1985/1986/1987/1988/1989/1990/1991/1992/1993 Ford Mustang Fastback

Get retro with these brand new rear window louvers for the 1979-1993 Ford Mustang. These awesome louvers will fit all models of the 1979-1993 Ford Mustang. They are black in color and could be painted to match the body color of your car. Want to clear your rear window? Louvers attach with thumb screws for easy removal. Everything you need to install is included. Louvers come with very detailed instructions.

FEATURES:

DURABLE RATTLE FREE CONSTRUCTION

HIGH IMPACT, FADE RESISTANT, ABS PLASTIC

STAINLESS STEEL HARDWARE

READY & EASY TO PAINT TO MATCH YOUR COLOR

Ships via FEDEX OS2

1999-2004 Ford Mustang GT Fully Polished Exhaust System

1999/2000/2001/2002/2003/2004 Mustang GT /4.6L

T-304 SUS Fully Polished Stainless Steel Exhaust System

As a direct fit, SSS Converter Back Exhaust is a hand built system designed to increase horsepower, and torque with a deep tone. The mandrel bent, SUS304 stainless piping and mufflers are of the highest specification for flow and durability. Our systems are hand welded, utilize the bolt on factory mounting locations and include heavy duty hardware for ease of installation.

Features:

SUS304 Stainless Steel
Mandrel Bends
Modular design for easy installation.
3.5 inch rolled tips
Polished System
2.5 inch piping
Increased HP and Torque
Heavy duty hardware

Video/Sound Clip (works best on Internet Explorer browsers)

Innovation and attention to quality and detail set this exhaust apart from the crowd.

The sound of a Stainless Steel Systems is distinct and often referred to as "the Deep Muscle Car Sound". We have dyno tested our catback system and seen improvements of 12-14 horsepower over famous chambered style systems.

Compare our quality to any on the market today. We offer a Life-time warranty on every Stainless Steel Exhaust system.

You’re going to love the fit, finish, and performance of your Stainless Steel exhaust system. The sound is is what you will love. The finish and price is that of a system that would retail well over $600.

We use only the finest T-304 Stainless Steel and use a thick 16 gauge. Compare this to some of the cheap 20 gauge competitors! Do not be fooled when they say "light weight", what they mean is they did not spend the money on materials!! Our whole system comes fully polished, not just the tips.

The system bolts on and comes with heavy duty band clamps, not inexpensive C clamps. This is a system you can be proud of.

Included with every kit is a detailed, easy to follow, instruction manual that will make it simple for your shop to install your new system quickly and efficiently.

2005-2008 Mustang Steeda GT Logo Door Sill Plates

2005, 2006, 2007, 2008 Ford Mustang

(Pictured: Pony Logo)

Dramaticly transfer your Mustangs door sill area with these precision cut, decorative door panels. These door sills are made of durable Mylar with super strong 3M adhesive backing. This kit comes with everything you need to install your new door sill plates in minutes!

Benefits

Classly Appearance and Look
Precision Laser Cut
Reflective Mirror Finish
Comes With Everything You Need

2005-2008 Mustang Steeda Pony Logo Door Sill Plates

2005, 2006, 2007, 2008 Ford Mustang

Benefits

Classly Appearance and Look
Precision Laser Cut
Reflective Mirror Finish
Comes With Everything You Need

2005-2008 Mustang Polished Aluminum Door Still Plates Powered

2005, 2006, 2007, 2008 Ford Mustang

Made from Aluminum these Door sills are available in a Brushed finish and are available with several different engraved logos. Personalize your S197 Mustang with either the Steeda, Ford or Powered By Ford name and logo.

Benefits

OEM Fit and Quality
Easy install in minutes
Quality aluminum product

2005-2008 Mustang Polished Aluminum Door Still Plates Steeda Log

2005, 2006, 2007, 2008 Ford Mustang

Benefits

OEM Fit and Quality
Easy install in minutes
Quality aluminum product

2005-2008 Mustang Brushed Aluminum Door Still Plates Powered

2005, 2006, 2007, 2008 Ford Mustang

Benefits

OEM Fit and Quality
Easy install in minutes
Quality aluminum product

2005-2008 Mustang Brushed Aluminum Door Still Plates Ford Logo

2005, 2006, 2007, 2008 Ford Mustang

Benefits

OEM Fit and Quality
Easy install in minutes
Quality aluminum product

2005-2008 Mustang Brushed Aluminum Door Still Plates Steeda Logo

2005, 2006, 2007, 2008 Ford Mustang

Benefits

OEM Fit and Quality
Easy install in minutes
Quality aluminum product

2005-2008 Mustang Steeda Aluminum Windows Switch Trim

2005, 2006, 2007, 2008 Ford Mustang V6 & GT

Steeda's Clear Anodized Aluminum Interior Trim match the interior appointments of your S197 Mustang beautifully. These aluminum overlays are a match for the "OE" finished door handles, shift knob and dash panel for that subtle yet completed interior appearance.

Benefits

Matches "OE" Silver Or Aluminum Finished Interior Trim
Installs Easily Using 3M Adhesive Backing

2005-2008 Mustang Steeda Aluminum Center Control Panel Trim

2005, 2006, 2007, 2008 Ford Mustang V6 & GT

Benefits

Matches "OE" Silver Or Aluminum Finished Interior Trim
Installs Easily Using 3M Adhesive Backing

2005-2008 Mustang Steeda Aluminum Radio Trim

2005, 2006, 2007, 2008 Ford Mustang V6 & GT

Benefits

Matches "OE" Silver Or Aluminum Finished Interior Trim
Installs Easily Using 3M Adhesive Backing

2005-2008 Mustang Steeda Aluminum Console Trim

2005, 2006, 2007, 2008 Ford Mustang V6 & GT

* Will not fit 2008 Mustangs with optional Ambient Lighting.

Benefits

Matches "OE" Silver Or Aluminum Finished Interior Trim
Installs Easily Using 3M Adhesive Backing

2005-2008 Mustang Steeda Billet Side Mirror Button Bezel

2005, 2006, 2007, 2008 Ford Mustang V6 & GT

Steeda's new Billet Side Mirror Button and Bezel kit for Mustang, Fusion and Focus. Made in house from Billet 6061 aluminum, these pieces will be sure to dress up the interoir of your ride. The billet Steeda button simply slides over the existing piece. The bezel must be installed using a dab of silicone.

Benefits

Made from high quality billet aluminum
Easy install in minutes
Made in the USA in house

2005-2008 Mustang Steeda Billet Auto Shift Handle Cover

2005, 2006, 2007, 2008 Ford Mustang V6 & GT

Steeda's new Billet Shift Handle Cover kit is designed to fit the Stock Mustang Automatic shifter in the S197 Mustang. These covers are made from Billet 6061 aluminum and attach to the ends of the factory shift handle and are held in place by a tiny set-screw. Easy to install and they look great!

Benefits

Made from high quality billet aluminum
Easy install in minutes
Made in the USA

1987-1993 Mustang Steeda Black Aluminum Radiator Bracket

1987, 1988, 1989, 1990, 1991, 1992, 1993 Mustang

Steeda's new Aluminum Radiator Hold-down Bracket replaces old rusted brackets on your 87-93 Mustang. This trick lookin' bracket weighs less than a pound and holds your radiator securely in place. Great for stock radiators, it's also a perfect fix for those big racing radiators that don't fit with the stock brackets. Brackets are engraved with Steeda's logo and is anodized in popular colors such as blue, red, black, and polished aluminum. This piece adds style & beauty, and tells the world you only use the best performance parts, Steeda parts!

Benefits:

Lightweight
Works with radiators not otherwise compatible with stock brackets
Choice of colors plus Steea logo!

1987-1993 Mustang Steeda Polished Aluminum Radiator Bracket

1987, 1988, 1989, 1990, 1991, 1992, 1993 Mustang

NOT ENGRAVED (black decal included)

Benefits:

Lightweight
Works with radiators not otherwise compatible with stock brackets
Choice of colors plus Steea logo!

1987-1993 Mustang Steeda Red Aluminum Radiator Bracket

1987, 1988, 1989, 1990, 1991, 1992, 1993 Mustang

Benefits:

Lightweight
Works with radiators not otherwise compatible with stock brackets
Choice of colors plus Steea logo!

1987-1993 Mustang Steeda Blue Aluminum Radiator Bracket

1987, 1988, 1989, 1990, 1991, 1992, 1993 Mustang

Benefits:

Lightweight
Works with radiators not otherwise compatible with stock brackets
Choice of colors plus Steea logo!

1979-1995 Mustang 5.0L Steeda 180 degree Thermostat

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Mustang 5.0L

Steeda's 180° thermostat keeps your engine running just a little cooler to keep horsepower and torque up and coolant temperatures down!

Benefits:

Keeps your engine cool!

1996-1998 Mustang Cobra Steeda 180 degree Thermostat

1996, 1997, 1998 Mustang Cobra

Steeda's 180° thermostat keeps your engine running just a little cooler to keep horsepower and torque up and coolant temperatures down!

Benefits:

Keeps your engine cool!

1996-1998 Mustang GT Steeda 180 degree Thermostat

1996, 1997, 1998 Mustang GT

Steeda's 180° thermostat keeps your engine running just a little cooler to keep horsepower and torque up and coolant temperatures down!

Benefits:

Keeps your engine cool!

2005-2008 Mustang Steeda High Capacity Heat Exchanger

2005, 2006, 2007, 2008 Ford Mustang Shelby GT500 / GT w/ Roush or Magnuson SuperchargerSteeda's in house designed heat exchanger is the perfect upgrade for the supercharged Shelby GT500 and is also compatible with Roush and Magnacharger supercharged S197 Mustang GT's with minor modification.

This heat exchanger dwarf's the factory Shelby GT500 unit and provides an over 100% cooling capacity increase in Shelby GT500 applications. This results in substancially reduced air inlet temperatures increasing supercharger power output under all conditions!

Our heat exchanger comes with all mounting hardware for installation on Shelby GT500 applications. Requires minor modifications for use on Magnacharger and Roush supercharged applications.

Benefits:

166% larger coolant capacity
Reduced air charge temperatures
Increased horsepower under all conditions!

1986-1993 Mustang 351 Steeda Strut Tower Brace

1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Ford Mustang 351

Precision welded from 4130 chrome-moly alloy steel for superior strength and light weight. Created specifically to fit around the larger 351W engine, including extra room for most superchargers. Will not fit under stock hood. 1986-1993 351 Brace is a two point bar which does not connect to the fire wall.

CLOSED TRIANGLE SHAPE FOR STRENGTH AND ULTIMATE HANDLING
DESIGNED TO WORK WITH CASTER/CAMBER PLATES
ALLOWS FOR AFTERMARKET MANIFOLDS

1994-1995 Mustang 351 Steeda Strut Tower Brace

1994,1995 Ford Mustang 351

CLOSED TRIANGLE SHAPE FOR STRENGTH AND ULTIMATE HANDLING
DESIGNED TO WORK WITH CASTER/CAMBER PLATES
ALLOWS FOR AFTERMARKET MANIFOLDS

1979-1993 Mustang Steeda Roll Cage

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Ford Mustang

Road Race Roll Cages (not pictured)

Roll Cages add additional bars which come forward along the roofline from the main hoop and turn down to the floor by the dashboard, a cross bar along the top of the windshield, and side protection bars along each door.

Important Note: All roll bars made from DOM tubing. Rollbars come spray-painted black for corrosion protection only. Scratches will occur during shipping and are not covered under warranty. Customer is responsible for finish and painting of roll bar.

1994-2004 Mustang Steeda Roll Cage

1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang

Road Race Roll Cages (not pictured)

1979-1993 Mustang Convertible Steeda Drag Race Roll Bar

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Ford Mustang Convertible

Drag Race Bars

Drag race style roll bars have braces which extend forward from the main hoop over the drivers shoulder to the floor, by the driver and passengers feet. Removable cross brace and seat back support brace are available as special order options at additional cost - please email us.

1979-1993 Mustang Steeda Drag Race Roll Bar

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Ford Mustang

Drag Race Bars

1994-2004 Mustang Convertible Steeda Drag Race Roll Bar

1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang Convertible

Drag Race Bars

1994-2004 Mustang Steeda Drag Race Roll Bar

1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang

Drag Race Bars

1983-1993 Mustang Convertible Steeda Road Race Roll Bar

1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Ford Mustang Convertible

Road Race Roll Bars

Road Race style Roll Bars have a diagonal cross brace from behind the drivers head to the main hoop near the floor on the passenger side. Removable cross brace and seat back support brace are available as special order options at additional cost - please email us.

1979-1993 Mustang Steeda Road Race Roll Bar

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Ford Mustang

Road Race Roll Bars

1994-2004 Mustang Convertible Steeda Road Race Roll Bar

1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang Convertible

Road Race Roll Bars

1994-2004 Mustang Steeda Road Race Roll Bar

1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang

Road Race Roll Bars

1979-1993 Mustang Steeda Hatchback Bolt-In Roll Bar

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Ford Mustang Hatchback

4-Point Hatchback Bolt-In Roll Bar

For the total "Pro-Street" effect, the rear legs of this Steeda roll bar bolt to the floor in your hatchback area rather than into the wheel wells. An easy 2-3 hour bolt-in installation with no cutting required.

1999-2004 Mustang Steeda Convertible Roll Bar

1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang Convertible 4-Point

4-Point Bolt-In Roll Bars

Our most popular Roll Bars! A stiff body structure is essential to great handling. Four point roll bars stiffen the structure of the car, prolonging body life, preventing squeaks and rattles, and improving handling. Our street roll bars allow the rear seat and interior trim to remain in place, and do not interfere with convertible tops.

1999-2004 Mustang Steeda Hardtop Roll Bar

1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang

4-Point Bolt-In Roll Bars

1983-1993 Mustang Steeda Convertible Roll Bar

1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Ford Mustang Convertible

4-Point Bolt-In Roll Bars

1979-1993 Mustang Steeda Roll Bar

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Ford Mustang Hatchback & Coupe

4-Point Bolt-In Roll Bars

1994-1998 Mustang Steeda Convertible Roll Bar

1994, 1995, 1996, 1997, 1998 Ford Mustang Convertible

4-Point Bolt-In Roll Bars

1994-1998 Mustang Steeda Hardtop Roll Bar

1994, 1995, 1996, 1997, 1998 Ford Mustang

4-Point Bolt-In Roll Bars

2005-2008 Mustang Convertible Steeda Street Sport Roll Bar

2005, 2006, 2007 , 2008 Ford Mustang Convertible

Steeda's Street Sport Roll bars are the perfect roll bar for the street enthusiast.

These 4-point roll bars are a bolt in design and feature a removeable horizontal harness bar. This allows you to have a harness mount for your weekend track events. For street use this bar can be removed allowing normal rear seat access for passengers.

Made of 1 3/4" steel tubing these bars provide excellent chassis stiffening and make a great addition to any Mustang. Available for coupe and convertible models.

2005-2008 Mustang Coupe Steeda Street Sport Roll Bar

2005, 2006, 2007 , 2008 Ford Mustang Coupe

Steeda's Street Sport Roll bars are the perfect roll bar for the street enthusiast.

Made of 1 3/4" steel tubing these bars provide excellent chassis stiffening and make a great addition to any Mustang. Available for coupe and convertible models.

1994-2004 Mustang Convertible Steeda Street Sport Roll Bar

1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang Convertible

Steeda's Street Sport Roll bars are the perfect roll bar for the street enthusiast.

Made of 1 3/4" steel tubing these bars provide excellent chassis stiffening and make a great addition to any Mustang. Available for coupe and convertible models.

1994-2004 Mustang Coupe Steeda Street Sport Roll Bar

1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang Coupe

Steeda's Street Sport Roll bars are the perfect roll bar for the street enthusiast.

Made of 1 3/4" steel tubing these bars provide excellent chassis stiffening and make a great addition to any Mustang. Available for coupe and convertible models.

1999-2004 Ford Mustang Steeda Cobra IRS Subframe Bracket Kit

1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang Cobra

Steeda's IRS Subframe bracket kit provides an immediate improvement in handling and eliminates flexing of the IRS subframe mounting bracket.

The rear suspension subframe of the 99-04 Cobra attaches to the car via a cantilevered bracket. The outer half of this bracket is completely unsupported and flexes significantly, leading to less predictable handling as the entire rear suspension system shifts under the car. Steeda's support kit reinforces the bracket and eliminates flexing. Overall handling and responsiveness is improved, and wheel hop is reduced.

The support welds to subframe bracket and bolts to the inner fender well with the supplied hardware.

1999-2004 Mustang Steeda Cobra IRS Differental Cover Brace

1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang Cobra

The Cobra IRS Differential cover is cast in aluminum, a material prized for its unique property of strength without the weight of steel or cast iron. Yet aluminum is not as flexible as steel, so when you push your Cobra to the limit in the corners, you may be applying enough force to twist the cover beyond it's ability to flex. Repeatedly doing this causes the metal separate.

Without resorting to a replacement cover made entirely of steel or iron, the engineers at Steeda designed the steel brace shown in the photo below, right. By mounting with 6 bolts (supplied) where other designs use 5, the Steeda Autosports Cobra IRS Differential Cover Brace provides 20% more points of attachment, yeilding greater strength and safety. Installation is straightforward using the supplied hardware, and the we have even thoughtfully included a hole to permit easy access to the differential fill plug without the need to remove the brace.

1979-2004 Mustang Steeda Subframe Connector Cross Brace Kit

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang

Adding a cross-brace to your subframe-connector cuts the free span length of the connector in half, doubles the number of attachment points, and creates a truss structure with the floorpan. The increased strength reduces body flexing, dampens floorboard vibrations and lessens interior harmonics. The cross-braces weld to the subframe-connector and attach to the seat-bolts using nuts provided in the kit. Reinforcing the seat mount in this way reduces seat movement and also prevents floorpan cracks. Cuts free span length of the connector in half

Product Benefits

Doubles the number of attachment points
Increased strength reduces body flexing
Welds to subframe-connector & attaches to the seat bolts using nuts provided in the kit

1985-1993 Mustang Steeda Convertible 4130 Alloy Steel G-Trac Bar

1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Ford Mustang Convertible

The revolutionary G-Trac bar was developed by Steeda's SCCA road race team to stiffen the Fox body K-member and maintain proper suspension geometry in max-G cornering. Such a good idea, it was copied by the factory starting in 1994. We still do it better. Includes all hardware and instructions.

1979-2004 Mustang Steeda 4130 Alloy Steel G-Trac Bar

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang (except convert.)

1979-2004 Mustang Steeda Full Length Subframe Connectors

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang

Steeda Full length subframe connectors have been improved with a new one-piece reinforced cross brace. Some subframe cross braces have 8 individual gussets which must be carefully positioned and welded on. Still other kits use no reinforcements at all. Steeda cross braces now have reinforcing gussets built-in, for greater strength with less welding.

These true full-length connectors run the entire length of the floor pan for increased chassis rigidity, better handling and improved ride. The beefy 1.25 by 2 inch connectors are perfect for serious cars with high horsepower, sticky tires or competition suspension. They are reinforced at each bend and include Steeda’s exclusive torque box reinforcing plate for a stronger attachment to the rear subframe.

Full-length subframe connectors are available in bare steel or zinc plated finish. The zinc plating can be welded over, and then only the weld joints need to be spray-painted vs. the whole kit needing to be spray-painted.

1979-2004 Mustang Zinc Plated Full Length Subframe Connectors

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang

2003-2004 Mustang Steeda Mach 1 3 Point Strut Tower Brace

2003, 2004 Ford Mustang Mach 1

Strengthen the chassis and prevent shock tower flex under hard cornering in your 2003-2004 Mach 1. Steeda's new 3 Point Brace is specifically made for your vehicle from 4130 Chrome-Moly Alloy Steel and Powdercoated Black.

2003-2004 Mustang Cobra Steeda 3 Point Strut Tower Brace

2003, 2004 Ford Mustang

Reduce strut tower flex, improve handling and stiffen the chassis with this 4130 moly alloy strut tower brace. Two point brace ties strut towers together; three point triangulates with added firewall mount for maximum stiffness. Both have been engineered by Steeda to clear the Cobra supercharger without compromising performance.

2003-2004 Mustang Cobra STEEDA 2 Point Strut Tower Brace

2003, 2004 Ford Mustang Cobra

2003-2004 Mustang Mach 1 2-Pt Strut Tower Brace

2003, 2004 Ford Mustang Mach 1

Reduce strut tower flex, improve handling and stiffen the chassis with one of our 4130 moly alloy strut tower braces.

NOTE: Will NOT fit Bullitt.

1979-2004 Mustang Steeda Rear Shock Tower Brace

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Ford Mustang

Limit horsepower-wasting chassis flex with a Steeda Rear Shock Tower Brace. A great compliment to a coil-over system; will yield a stiffer chassis regardless of your suspension choice. Zinc-plated, chrome-moly construction. Some welding required for installation.

Notes
1979 thru 1993 hatch back will require light trimming of factory inner quarter panel sight plugs over rear shocks. All other models will require trimming of factory inner trunk liner.

2005-2008 Mustang Steeda Front Swaybar Mount Brace

2005, 2006, 2007, 2008 Ford Mustang

Steeda's Front Swaybar Mount Brace helps reduce front chassis flex and limits the movement of the front swaybar mount by tying the #1 and #2 cross members together at the staybar mount. This produces better swaybar compliance and improved front chassis stiffness.

2005-2008 Mustang Steeda Rear Shock Tower Brace

2005, 2006, 2007, 2008 Ford Mustang GT V8, V6

Further limit g-loading with a Steeda Rear Shock Tower Brace. Stainless steel hardware including teflon lined rod ends included. A great complement to a coil-over system; will yield a stiffer chassis regardless of your suspension choice. Some welding required for installation.

Note: Does not fit in cars with Mach 1000 sound system.

2005-5008 Mustang Steeda G-Trac Brace

2005, 2006, 2007, 2008 Ford Mustang

When you provide a positive link between the lower control arms, you limit g-load deflection and gain better suspension compliance. This trick link does that.

NOTE: When using the G-Trac Brace with the Control arm Relocation kit two 14mm - 2.0 x 100mm long bolts are required for installation.

2005-2008 Mustang GT Steeda Steel Strut Tower Brace

2005, 2006, 2007, 2008 Mustang GT V8

Steeda's double bar Chrome-Moly Alloy Steel strut tower brace is a great addition to your S197 Mustang.

With 2 bars made of chrome moly steel instead of regular mild steel you get double the strength over competitive mild steel braces.

Several part numbers are available accomodating V6 and GT V8 models as well as most aftermarket intake plenum cover designs.

Note: For GT Mustangs equipped with a FACTORY plenum cover from Ford's optinal appearance package slight modifications may be necessary for clearance.

Product Benefits

Strongest brace on the market using chrome-moly alloy steel
Improves front chassis stiffness
Improves ride quality over rough surfaces
Improves vehicle handling

2005-2008 Mustang w/ Cowl Hood Steeda Steel Strut Tower Brace

2005, 2006, 2007, 2008 Mustang w/ Cowl Hood

Product Benefits

Strongest brace on the market using chrome-moly alloy steel
Improves front chassis stiffness
Improves ride quality over rough surfaces
Improves vehicle handling

2005-2008 Mustang V6 Steeda Steel Strut Tower Brace

2005, 2006, 2007, 2008 Mustang V6

Product Benefits

Strongest brace on the market using chrome-moly alloy steel
Improves front chassis stiffness
Improves ride quality over rough surfaces
Improves vehicle handling

2005-2008 Mustang Roush/Saleen w/SC Billet Strut Tower Brace

2005, 2006, 2007, 2008 Mustang Roush & Saleen w/ SC

Enhance handling and appearance at the same time! The chrome moly bar eliminates body flex while the CNC machined billet endcaps add a touch of Steeda style. Spherical rod ends provide for fine adjustment.

2005-2008 Mustang GT Steeda Billet Strut Tower Brace

2005, 2006, 2007, 2008 Mustang GT

2007-2008 Mustang GT500 Steeda Double Bar Strut Tower Brace

2007, 2008 Ford Mustang Shelby GT500

Steeda's all new Strut Tower Brace is designed exclusively for the GT500 Mustang. Made from super strong 4130 Chrome Moly tubing, it is designed to prevent unwanted chassis flex. This is definitely a must for these high horsepower cars! A simple bolt in design that clears the factory intake manifold and supercharger. Available in a textured Black Powdercoat finish.

2005-2008 Mustang Steeda Lightweight Radiator Support

2005, 2006, 2007, 2008 Mustang V6 & GT

Steeda’s new Tubular Front radiator support is the only one on the market today that allows you to maintain your front swaybar and reduce weight at the same time! Steeda Engineers designed this support from super strong and light 4130 Chrome moly steel material. This resulted in a tubular support that is half the weight of the stock steel unit and yet is still strong enough for you to run your front swaybar when not at Drag Strip!! Tig welded and Powdercoated in silver metal flake this part also looks great too. Accepts all factory hardware also, unlike the competition.

Benefits

Made from High Strength 4130 Steel
Light weight and lose it off the front of the car!
OEM Quality and Easy installation
A Must for any Hardcore Drag strip enthusist

2005-2008 Mustang Steeda 3 Point Frame Rail & Torque Box Brace

2005, 2006, 2007, 2008 Mustang V6 & GT

We spent countless hours fiquring out where the S197 Mustangs could benefit most from chassis stiffening. Here is the end result....Made from 4130 Chrome Moly material this brace is specifically designed for the S197 Mustang. It ties together the inner/outer frame rails and the rear lower control arm mount. Braces are silver powdercoated and come with mounting hardware. Can be bolted with supplied hardware but a welded installation is recommeded for maximum benefit from this brace.

Note: Does not fit convertibles

U.S. Patent Pending

Benefits

4130 Chrome Moly Design for Hardcore use also
Better handling for more stable cornering
Helps prevent and elimintate sqeaks and rattles

1987-1993 Mustang Steeda Stainless Steel Brake Sleeves

1987, 1988, 1989, 1990, 1991, 1992, 1993 Mustang V8

Steeda stainless steel brake sleeves replace the rubber retaining pin insulators on 1987-1993 V-8 Mustangs. They eliminate caliper deflection and rotor/pad distortion, and extend pad life up to 50%. Better control of the caliper means more stopping power and fewer warped rotors. These parts will pay for themselves by your next brake job. You can make the switch with basic hand tools and without disconnecting your brake lines.

Benefits

Replace rubber retaining pin insulators
Eliminate caliper deflection
Extend pad life up to 50%!

1994-2001 Mustang Steeda Quick Release Brake Pins** (EACH)

1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Mustang Cobra, Cobra R conversion

Quick release caliper retention pins allow fast brake pad and/or caliper changes in the pits. Eliminates the tiny E-clip which is difficult to remove and easy to lose. Just pull the wire handle and the pins come out. Perfect for endurance races where fast brake changes are a must. Fits 1994-2001 Cobra, Cobra R conversion (2300K), and Baer (PBR Caliper) front brakes.

**Note: 2 required per car

* Race Cars Only (Not recommended for street use).

2005-2008 Mustang Steeda Billet Brake Duct Kit

2005, 2006, 2007, 2008 Mustang GT V8, V6

Steeda's Billet Front Brake Duct Kit is designed to fit both the Steeda 2005+ Competition Front Fascia and the Stock 2005 + Front Bumper cover. Made from billet 6061 aluminum, they include 7ft of hose, mounting brackets and stainless steel hardware for easy installation. Note: That this kit can be modified to fit most applications other then S197 Mustangs.

Benefits

Brake cooling will results in extended pad life.
Cooler brake temps reduce fade, rotor and pad wear.
Better braking under extreme conditions.
High quality billet aluminum, not stamped

1979-1993 Steeda Mustang 5-Lug Converstion Kit

1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Mustang

The easiest route for upgrading your older Fox Body, our kits allow you to retain the same wheel offset as the factory four - lug setup. Kit includes slotted, five - lug rotors up front with five - lug axles and drums out back. Stronger! Safer! And your Steeda 17 x 9 Ultra-Lite & Ultra-Lite II wheels will bolt right up.

Benefits

Retain same wheel offset
Stronger and safer

1994-2004 Steeda Mustang Cobra Brake Upgrade Kit 3

1999/2000/2001/2002/2003/2004 Mustang Cobra, GT, V6

We've carefully selected some of our most popular Cobra Brake Components, and created money saving kits for anyone wanting to freshen up the brakes on their 99-04 Cobra, GT or V-6. For installation on 94-98 GT & V-6, add FRPP PN M-2321-A.

Similar to the Steeda Cobra Brake Kit 1, but with Power Slot rotors - which have a silver, rust inhibiting finish.

1- M-2320-C Cobra Calipers Loaded
1- 469-8145PSR Power Slot 13" Rotors
1- 469-8144PSL Power Slot 13" Rotors
1- 125-693170 Steel Braided Front Lines

1994-2004 Steeda Mustang Cobra Brake Upgrade Kit 1

1999/2000/2001/2002/2003/2004 Mustang Cobra, GT, V6

This is the OEM Equivalent, with Cobra Calipers, Brembo Rotors and Braided Front Lines

1- M-2320-C Cobra Calipers Loaded
2- 356-27005 Brembo Stotted 13" Rotors
1- 125-693170 Steel Braided Front Lines

1994-2004 Steeda Rear Brake Upgrade

1994/1995/1996/1997/1998/1999/2000/2001/2002/2003/2004 Mustang GT

Step up your stopping power with these slotted replacement rotors for your SN 95 Mustang.

Benefits

Shorter stopping distances

2007-2008 Shelby Mustang GT500 Brake Upgrade Kit

Steeda's GT500 brake upgrade includes a direct replacement, 14 inch slotted rotor set for the front, Steeda's 13 inch brake upgrade for the rear, and stainless steel brake lines.

This kit will increase brake effectiveness and increase rear brake rotor size from 11.8 to 13 inches for improved looks.

This Kit Includes

555-6009 - Steeda 13" Rear Brake Upgrade Kit
555-6014 - Steeda 14" Slotted Rotors for GT500
Stainless Steel Brake Lines

Benefits

Improved braking & brake cooling
Perfect fit for the new GT500
OEM quality

2005-2008 Mustang 13" inch Rear Rotor Replacement - Left

2005/2006/2007/2008 Mustang

Steeda has designed and engineered a new 13" rear disc brake kit for S197 Mustangs and new GT500. The new kit has been developed utilizing the knowledge gained from Steeda's vast competition experience dating back to IMSA racing with 1993 and 95 Cobra R's .

The new, Made in America Steeda brake kit, is the lightest of its kind on the market resulting in less unsprung weight and rotating mass. The wider, larger diameter vented rotors provide better cooling and are slotted to disperse heat and gas buildup reducing brake fade. The brackets are manufactured from aircraft grade aluminum for greater strength and lighter weight. When combined with Steeda's 14" front disc brake kit, the 13" rear brakes provide optimum braking under all conditions.

Steeda's kit retains the excellent Ford factory caliper maintaining the proper piston size for compatibility with the sensitive Mustang Anti-Lock brake system and allows for easy sourcing of replacement brake pads and friction compounds. Also included are stainless steel braided brake hoses featuring factory brackets for easy O.E. type install. Steeda's kit at 13 inches in diameter also has better wheel fitment choices than competitive 14 inch kits. Order yours today to improve the looks and function of your Mustang's brakes!

Benefits

Increased width for better wear and cooling
Large Directional cooling vents
Lighter and stronger aircraft aluminum bracket
Lightest rear brake upgrade kit on the market
Perfect match for Steeda 14" front brake kit
Easy aftermarket wheel fitment
Can use stock brake pad options
Excellent upgrade for the Ford GT 500
Fits factory 17" wheel options
Made in the USA

2005-2008 Mustang 13" inch Rear Rotor Replacement - Right

2005/2006/2007/2008 Mustang

Benefits

Increased width for better wear and cooling
Large Directional cooling vents
Lighter and stronger aircraft aluminum bracket
Lightest rear brake upgrade kit on the market
Perfect match for Steeda 14" front brake kit
Easy aftermarket wheel fitment
Can use stock brake pad options
Excellent upgrade for the Ford GT 500
Fits factory 17" wheel options
Made in the USA

2005-2008 Mustang 13" Rear Brake Upgrade - Cross Drilled Rotors

2005/2006/2007/2008 Mustang

Benefits

Increased width for better wear and cooling
Large Directional cooling vents
Lighter and stronger aircraft aluminum bracket
Lightest rear brake upgrade kit on the market
Perfect match for Steeda 14" front brake kit
Easy aftermarket wheel fitment
Can use stock brake pad options
Excellent upgrade for the Ford GT 500
Fits factory 17" wheel options
Made in the USA

2005-2008 Mustang 13" inch Rear Brake Upgrade - Slotted Rotors

2005/2006/2007/2008 Mustang

Benefits

Increased width for better wear and cooling
Large Directional cooling vents
Lighter and stronger aircraft aluminum bracket
Lightest rear brake upgrade kit on the market
Perfect match for Steeda 14" front brake kit
Easy aftermarket wheel fitment
Can use stock brake pad options
Excellent upgrade for the Ford GT 500
Fits factory 17" wheel options
Made in the USA

2005-2008 Mustang GT Steeda 14" Inch Front Brake Kit

2005/2006/2007/2008 Mustang GT

Steeda has done it again with its new S197 Mustang front brake kit! This kit features 14 inch 2 piece rotors with floating aluminum hats, large 4 piston calipers with Steeda logo, DOT legal stainless steel brake lines, mounting brackets, hardware, and brake pads. Unlike our competitor's kits, Steeda went the extra mile and designed this kit with the proper piston sizes for compatibility with the sensitive S197 Mustang Anti-Lock brake system. This is an important safety factor under severe braking. Improper sizing can lead to ABS malfunction and increased stopping distances! Don't settle for a brake kit that wasn't designed with the specific performance and safety needs of your S197 Mustang in mind. This is the right kit for you! Requires 18x9 inch or larger wheels for clearance.

Note: These larger brakes require proper sized wheels to give you clearance.

Benefits

Complete bolt on brake upgrade
Only kit that preserves the proper operation of the factory ABS system, an important safety factor!
Far more affordable than the competition's equivalent 4-piston, 2-piece rotor kits!

1987-1993 Mustang Headlamp Weather Strip Kit

The rubber weatherstrip seal around the factory headlight assembly very typically over time deteriorates and becomes discolored. Renew your headlight weatherstrip with this kit. Also good with replacements lenses that don't come with a new seal.

Benefits

Quality Headlight Weatherstrip replacement
Renew your worn, deteriorated seals
Restores new factory appearance

1987-1993 Mustang 6 Piece Clear Replacement Headlight Kit

This reproduction 6 piece headlight kit is a high quality piece for the 87-93 Mustang. It is a direct replacement kit that includes all 6 lenses for a complete replacement of your headlight, parking light, and side marker assemblies.

Benefits

Complete 6 piece replacement set
Stylish clear look
Direct replacement for OEM pieces

1987-1993 Mustang 6 Piece OEM Replacement Headlight Kit

This OEM replacement headlamp kit includes all 6 pieces for a complete replacement of your headlight, turn signal and parking light assemblies. Direct replacement parts for direct fitment and no hassle installation.

Benefits

Original Factory look
Direct replacement
Complete 6 piece kit

Mustang Steeda /Speed Matters/ License Plate Frame

Let them know what parts you used to beat them with our great looking "Speed Matters" license plate frame. Made of black plastic with white lettering.

1994-2004 Mustang Steeda Floor Mats 4-piece Beige w/Black logo B

1994/1995/1996/1997/1998/1999/2000/2001/2002/2003/2004 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

1987-1993 Mustang Steeda Floor Mats Saddle Tan w/Black Logo

1987/1988/1989/1990/1991/1992/1993 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

1994-2004 Mustang Steeda Floor Mats 4-piece Graphite w/Silver lo

1994/1995/1996/1997/1998/1999/2000/2001/2002/2003/2004 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

1994-2004 Mustang Steeda Floor Mats 4-piece Silver Floor Mats

1994/1995/1996/1997/1998/1999/2000/2001/2002/2003/2004 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

1994-2004 Mustang Steeda Floor Mats 4-piece Gray w/Black Logo

1994/1995/1996/1997/1998/1999/2000/2001/2002/2003/2004 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

2005-2008 Mustang Steeda Floor Mats 2-piece Graphite w/Silver Lo

2005/2006/2007/2008 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

1994-2004 Mustang Steeda Floor Mats 4-piece Black w/Yellow logo

1994/1995/1996/1997/1998/1999/2000/2001/2002/2003/2004 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

1994-2004 Mustang Steeda Floor Mats 4-piece Black w/Red logo

1994/1995/1996/1997/1998/1999/2000/2001/2002/2003/2004 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

1994-2004 Mustang Steeda Floor Mats 4-piece Black w/Silver logo

1994/1995/1996/1997/1998/1999/2000/2001/2002/2003/2004 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

2005-2008 Mustang Steeda Floor Mats 2-piece Black w/Red logo

2005/2006/2007/2008 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

2005-2008 Mustang Steeda Floor Mats 2-piece Black w/Silver logo

2005/2006/2007/2008 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

2005-2008 Mustang Steeda Floor Mats 2-piece Black w/Yellow logo

2005/2006/2007/2008 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

2005-2008 Mustang Steeda Floor Mats 2-piece Black w/Blue logo

2005/2006/2007/2008 Mustang

Keep up the Steeda spirit inside the car as well. These thick, heavy-duty floor mats are super durable and color matched to compliment your Mustang's interior.

1987-1989 Mustang White Face Gauges 85 mph Speedometer

1987/1988/1989 Mustang

Give your Mustang the classic “white-face” performance gauge look. These high-quality white overlays install easily over the stock gauges. The kit includes a tool to remove instrument needles for an easy installation.

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

1987-1989 Mustang White Face Gauges 140 mph Speedometer

1987/1988/1989 Mustang

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

1990-1993 Mustang White Face Gauges 140 mph Speedometer

1990/1991/1992/1993 Mustang

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

1994-1995 Mustang GT White Face Gauges

1994/1995 Mustang GT

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

1996-1998 Mustang GT White Face Gauges

1996/1997/1998 Mustang GT

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

1999-2000 Mustang GT White Face Gauges

1999/2000 Mustang GT

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

2001-2004 Mustang GT White Face Gauges

2001/2002/2003/2004 Mustang GT

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

2005-2008 Mustang White Face Gauges

2005/2006/2007/2008 Mustang

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

2005-2008 Mustang V6 Aluminum Face Gauges - 6 Faces

2005/2006/2007/2008 Mustang V6

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

2005-2008 Mustang V6 Aluminum Face Gauges - 4 Faces

2005/2006/2007/2008 Mustang V6

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

2005-2008 Mustang V6 White Face Gauges - 4 Faces

2005/2006/2007/2008 Mustang V6

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

2005-2008 Mustang V6 White Face Gauges - 6 Faces

2005/2006/2007/2008 Mustang V6

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

2005-2008 Mustang GT Aluminum Face Gauges - 6 Faces

2005/2006/2007/2008 Mustang GT

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

2005-2008 Mustang GT Aluminum Face Gauges - 4 Faces

2005/2006/2007/2008 Mustang GT

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

2005-2008 Mustang GT White Face Gauges - 6 Faces

2005/2006/2007/2008 Mustang GT

Don't be fooled by other cheap low quality overlays that turn blotchy when lit. Our high quality gauge faces use the best materials to deliver consistent color and even backlighting at night.

1994 2004 Mustang GT MagnaPack Cat Back Exhaust 15673

MAGNAFLOW'S PRICE:	$595.11
PART #:	15673
YEAR:	99-04
DESCRIPTION:	4.6L V8, GT, Dual Magnapack System, 4x4x14" Muffler, 2.5" Tubing, Dual Rear Exit, 3.5" Tips (* Magnapack system utilizes a round style muffler to produce a more aggressive tone)
INSTALLATION:	Install Sheet
SOUND CLIP:	Clip 1 Clip 2
DYNO SHEET:	No Dyno Sheets Available
MAGAZINE ARTICLES:	Article 1 Article 2 Article 3

All Stainless Steel, Mandrel-Bent, Cat-Back Exhaust System With Polished Stainless Steel Tips.

Magnapack system utilizes a round style muffler to produce a more aggressive tone.

This Kit Includes
MagnaFlow's Patented Wide-Open™ Performance Mufflers.
All Stainless Steel Mandrel Bent Tubing.
All Necessary Bolts & Hardware.
Step-by-step, fully illustrated installation manual.

FREE SHIPPING & NO HANDLING CHARGES within the 48 United States.

The Inside Story on MagnaFlow Mufflers!
The Wide-Open™ performance mufflers feature a stainless steel mesh in the core which warms up quickly to maintain the muffler's optimal temperature for exhaust movement, creating a porous barrier that allows sound vibrations to pass freely into the acoustical absorbing material. Packed between the steel mesh and the steel shell, the acoustical absorbing material will filter out all the harsh exhaust vibrations, giving MagnaFlow its rich, powerful, performance tone.

Increased Performance through Improved Tubing!
Unlike Louvers with bent-in metal flaps which create turbulence and slow air flow, MagnaFlow’s one piece perforated stainless steel tubing lets gasses pass right through without any turbulence or backpressure with absolutely no restrictions. Its mandrel-bent tubing design is maintained throughout the length of the tubing, regardless of the bend. The flow capacity in the bend is the same as the straight-away and will result in no reductions or backpressure. All MagnaFlow system tubing is mandrel-bent to assure system wide high-flow.

1986-1993 Mustang V8 Magnaflow Cat-Back Exhaust 15630

Magnaflow's PRICE:	$557.37
PART #:	15630
YEAR:	86-93
DESCRIPTION:	5.0L V8, LX, 4x9x14" Muffler, 2.5" Tubing, Rear Exit, 3" Tip
INSTALLATION:	Install Sheet
SOUND CLIP:	Clip 1 Clip 2 Clip 3
DYNO SHEET:	No Dyno Sheets Available
MAGAZINE ARTICLES:	Article 1 Article 2 Article 3

All Stainless Steel, Mandrel-Bent, Cat-Back Exhaust System With Polished Stainless Steel Tips.

This Kit Includes
MagnaFlow's Patented Wide-Open™ Performance Mufflers.
All Stainless Steel Mandrel Bent Tubing.
All Necessary Bolts & Hardware.
Step-by-step, fully illustrated installation manual.

FREE SHIPPING & NO HANDLING CHARGES within the 48 United States.

2005-2008 Mustang GT Flowmaster Axle Back Exhaust

FREE SHIPPING.

4.6L V8 - 2005 / 2006 / 2007 / 2008
Specialty 5" X 10" mufflers
4.00" Logo Embossed Stainless Tips
American Thunder
DOR
NOW! INCLUDES Convertibles

Ford Mustang TurboCharger T3

FREE SHIPPING WITHIN THE 48 UNITED STATES

The "Heart" of your custom Mustang Turbo modification. Perfect for a V6 twin turbo custom job.

Technically speaking, a MimoUSA turbocharger is an exhaust gas-driven compressor used to increase the power output of an internal-combustion engine by compressing air that is entering the engine thus increasing the amount of available oxygen. An essential advantage of turbochargers is that they upgrade the vehicle with a extremely significant increase in engine power with only a slight increase in weight. The significant increase is called a "Boost". The "Boost" refers to the increase in manifold pressure that is created by the turbocharger in the intake routine or by the intake manifold that exceeds normal atmospheric pressure. The MimoUSA Turbochargers' boost pressure is significantly and safely restrained to maintain the entire engine system including the turbo within its production operating range by operating the wastegate which shunts the exhaust gases away from the exhaust side turbine. In a simplified manner, the MimoUSA turbocharger will turn your vehicle into a speed demon.

Are you looking for the most extreme boost possible? We are talking about blowing the other race competitors out of the water? The new MimoUSA Turbocharger makes all this possible. From the startline to the finish, we guarantee that you and all the others around you will be completely blown away with amazement. The base and most essential element of all performance products, the MimoUSA Turbocharger, can only be stressed as a "buy now, install immediately" type of product. If you are willing to advance your vehicle from a stock car to a powerfully fast work-of-art, the MimoUSA Turbocharger is guaranteed to put fear in all the competitors at the race track.

MimoUSA Manufactured & Tested
High Quality & Top Value
Ultimate Boost and Performance
Exclusive Performance Upgrade
Satisfaction Guaranteed

The performance T3 Series Turbocharger is ideal for small displacement engines with horsepower returns ranging from 150 HP to 325 HP.
The basic unit does not include wastegate.

Ford Mustang TurboCharger T3/T4 W/ Wastegate

FREE SHIPPING WITHIN THE 48 UNITED STATES

3" Inlet Diameter
2" Outlet
Wet Float Bearing
1/8 Npt Oil Inlet
.50 A/R Compressor
.63 A/R Turbine
.57 Trim ( Oil Cooled Turbo)

2005-2008 Mustang Konig Beyond 20x9 Wheel

YEARS:
2005 / 2006 / 2007 / 2008

CENTER CAP:
CENTER CAP INCLUDED

BACK SPACING:
6.77 INCHES

BOLT CIRCLE:
5 X 114.3/4.50

LUG STYLE:
CONI SEAT/DUPLEX LUG

OFFSET:
45MM, 1.77 INCHES

RETAIL PRICE 408.76
FMP's PRICE 299.00

2005-2008 Mustang Chrome 18x9 Bullitt Wheel

Show your Mustang alittle 70's love. Cragar Super Sport Bullitt wheels are the only way to roll.

YEARS:
2005 / 2006 / 2007 / 2008

CENTER CAP:
CENTER CAP INCLUDED

BACK SPACING:
6.38 INCHES

BOLT CIRCLE:
5 X 114.3/4.50

LUG STYLE:
CONI SEAT/DUPLEX LUG

OFFSET:
35MM, 1.37 INCHES

RETAIL PRICE 348.59
FMP's PRICE 259.00

1979-1993 Mustang Aluminum Mach 1 Style Rear Window Louver

Hatchback.

Get retro with these brand new ALUMINUM rear window louvers for the 1979-1993 Ford Mustang. These awesome louvers will fit all models of the 1979-1993 Ford Mustang. They are black powder coated and could be painted to match the body color of your car. Want to clear your rear window? Louvers attach with thumb screws for easy removal. Everything you need to install is included. Louvers come with very detailed instructions.

FEATURES:

DURABLE RATTLE FREE CONSTRUCTION

FADE RESISTANT, ALUMINUM

STAINLESS STEEL HARDWARE

READY & EASY TO PAINT TO MATCH YOUR COLOR

1979-1993 Mustang Aluminum Mach 1 Style Rear Window Louver

Non-Hatchback.

FEATURES:

DURABLE RATTLE FREE CONSTRUCTION

FADE RESISTANT, ALUMINUM

STAINLESS STEEL HARDWARE

READY & EASY TO PAINT TO MATCH YOUR COLOR

1994-2004 Mustang Aluminum Mach 1 Style Rear Window Louver

Get retro with these brand new ALUMINUM rear window louvers for the 1994-2004 Ford Mustang. These awesome louvers will fit all models of the 1994-2004 Ford Mustang. They are black powder coated and could be painted to match the body color of your car. Want to clear your rear window? Louvers attach with thumb screws for easy removal. Everything you need to install is included. Louvers come with very detailed instructions.

FEATURES:

DURABLE RATTLE FREE CONSTRUCTION

FADE RESISTANT, ALUMINUM

STAINLESS STEEL HARDWARE

READY & EASY TO PAINT TO MATCH YOUR COLOR

2005-2008 Mustang 4.6L V8 Triple Dog Downloader Tuner

Bully Dog performance for your gasoline powered vehicle. The Triple Dog Power Pup is a programmer/tuner that downloads horsepower and performance enhancing programs into your vehicles ECU. The regular tune adds 10-12hp while the Premium adds up to 25hp.

The downloader offers two different Engine Tuners above stock to accommodate various driving conditions; read below for recommended use.

Engine Tuning Programs:
The engine tuning options below describe what tunes are available through the Triple Dog and their recommended use.

* Stock:
Choosing the stock engine tune will result in no change to engine horsepower output. All other downloader features can still be accessed if the stock engine tune is chosen
* Regular:
The engine tune is recommended for use with 85 or 87 octane gasoline. For maximum effectiveness end users should increase shift firmness and shift points. This tune can be used for everyday driving and towing. Dynamometer testing results have shown a 10-12hp increase in rear wheel horsepower.
* Premium:
This engine tune is recommended for use with 91 or 93 octane gasoline. It is recommended that shift firmness and shift points be raised with this engine tune. This tune can be used for everyday driving, towing and racing. Dynamometer testing results have shown up to 25 horsepower and 24lbs. ft. torque increase, on the premium tune, to the rear wheels.

FREE GROUND SHIPPING 48 STATES

2004 Mustang 4.6L V8 Triple Dog Downloader Tuner

The downloader offers two different Engine Tuners above stock to accommodate various driving conditions; read below for recommended use.

Engine Tuning Programs:
The engine tuning options below describe what tunes are available through the Triple Dog and their recommended use.

* Stock:
Choosing the stock engine tune will result in no change to engine horsepower output. All other downloader features can still be accessed if the stock engine tune is chosen
* Regular:
The engine tune is recommended for use with 85 or 87 octane gasoline. For maximum effectiveness end users should increase shift firmness and shift points. This tune can be used for everyday driving and towing. Dynamometer testing results have shown a 10-12hp increase in rear wheel horsepower.
* Premium:
This engine tune is recommended for use with 91 or 93 octane gasoline. It is recommended that shift firmness and shift points be raised with this engine tune. This tune can be used for everyday driving, towing and racing. Dynamometer testing results have shown up to 25 horsepower and 24lbs. ft. torque increase, on the premium tune, to the rear wheels.

FREE GROUND SHIPPING WITHIN 48 STATES

2005 06 07 08 Mustang Mach 1 Style Aluminum Rear Window Louver

Get retro with this brand new Mach 1 Style ALUMINUM rear window louver for the 2005 / 2006 / 2007 / 2008 Ford Mustang. Louvers will fit all models of the 2005-2008 Ford Mustang. They are satin black in color and could be painted to match the body color of your car. Want to clear your rear window? These are designed for for easy removal. Louvers bolt to stainless steel plates that are mounted to your rear window with automotive grade 3M bonding tape. Everything you need to install is included. Louvers come with very detailed instructions.

FEATURES:

DURABLE RATTLE FREE CONSTRUCTION.

HIGH IMPACT, FADE RESISTANT, BLACK ALUMINUM CONSTRUCTION.

STAINLESS STEEL HARDWARE.

READY & EASY TO PAINT TO MATCH YOUR COLOR.

ABSOLUTELY NO DRILING REQUIRED.

MSRP: $532.00

Ships via FEDEX OS2

1965-1980 Ford Mustang Standard Thermal Fan Clutch 390/6.4L

Standard thermal fan clutch.

Engages and disengages fan at certain engine temperatures.

Reduces fan drag on engine.

Clockwise fan rotation looking from in front of car to the back.

2005-2006 Mustang Steeda Shift Knob

Get a grip and never miss a shift with our ergo-designed shift knob for the '05 Mustang. The perfect topper to the patented Tri-Ax® Shifter! NOTE: Will not fit factory shifter handles.

Ford Mustang (set 3) Aluminum Dash Trim Kit 94-00

High Quality, extra flexible Vinyl Dash Trim Kit for your Mustang.

Want to revolutionize the interior of your vehicle? Well here's your opportunity. Real Aluminum Dash Kits is your answer to altering your vehicle into a modern work of art. Not only does the Real Aluminum Dash Kit completely upgrade your vehicles appearance, but the installation process makes the alteration quick, fun and easy. So here's your chance to break the OEM barrier. Install a Real Aluminum Dash Kit onto your vehicle and watch the ultimate transformation before your eyes!

Ultra-thin Aluminum. The thinnest on the market. About as thick as card-stock. Overlaid with plastic.
All dash trims kits created in USA by MimoUSA with fine quality material and 3M Adhesive tape.
Precise fit, 100% Accurate Smooth Laser Cutting, and Ultraviolet drying.
Comes with easy to read Installation Instructions and everything you need to install it.
15-Days money back guarantee and lifetime warranty. Restrictions apply.
Black-Lite compatibility (Install a black lite over the dash trim and it will give off a black-lite effect.)

NOTE: Some dash trim kits are not designed to replace the factory existing wood on your car. Please make sure to look at the diagram for your particular car model to ensure that you are getting the right kit for yourself.

Ford Mustang (set 3) Aluminum Dash Trim Kit 01-04

High Quality, extra flexible Vinyl Dash Trim Kit for your Mustang.

Ultra-thin Aluminum. The thinnest on the market. About as thick as card-stock. Overlaid with plastic.
All dash trims kits created in USA by MimoUSA with fine quality material and 3M Adhesive tape.
Precise fit, 100% Accurate Smooth Laser Cutting, and Ultraviolet drying.
Comes with easy to read Installation Instructions and everything you need to install it.
15-Days money back guarantee and lifetime warranty. Restrictions apply.
Black-Lite compatibility (Install a black lite over the dash trim and it will give off a black-lite effect.)

Ford Mustang (set 2) Aluminum Dash Trim Kit 94-00

High Quality, extra flexible Vinyl Dash Trim Kit for your Mustang.

Ultra-thin Aluminum. The thinnest on the market. About as thick as card-stock. Overlaid with plastic.
All dash trims kits created in USA by MimoUSA with fine quality material and 3M Adhesive tape.
Precise fit, 100% Accurate Smooth Laser Cutting, and Ultraviolet drying.
Comes with easy to read Installation Instructions and everything you need to install it.
15-Days money back guarantee and lifetime warranty. Restrictions apply.
Black-Lite compatibility (Install a black lite over the dash trim and it will give off a black-lite effect.)

Ford Mustang (set 2) Aluminum Dash Trim Kit 01-04

High Quality, extra flexible Vinyl Dash Trim Kit for your Mustang.

Ultra-thin Aluminum. The thinnest on the market. About as thick as card-stock. Overlaid with plastic.
All dash trims kits created in USA by MimoUSA with fine quality material and 3M Adhesive tape.
Precise fit, 100% Accurate Smooth Laser Cutting, and Ultraviolet drying.
Comes with easy to read Installation Instructions and everything you need to install it.
15-Days money back guarantee and lifetime warranty. Restrictions apply.
Black-Lite compatibility (Install a black lite over the dash trim and it will give off a black-lite effect.)

Ford Mustang (set 1) Aluminum Dash Trim Kit 94-00

High Quality, extra flexible Vinyl Dash Trim Kit for your Mustang.

Ultra-thin Aluminum. The thinnest on the market. About as thick as card-stock. Overlaid with plastic.
All dash trims kits created in USA by MimoUSA with fine quality material and 3M Adhesive tape.
Precise fit, 100% Accurate Smooth Laser Cutting, and Ultraviolet drying.
Comes with easy to read Installation Instructions and everything you need to install it.
15-Days money back guarantee and lifetime warranty. Restrictions apply.
Black-Lite compatibility (Install a black lite over the dash trim and it will give off a black-lite effect.)

Ford Mustang (set 1) Aluminum Dash Trim Kit 01-04

High Quality, extra flexible Vinyl Dash Trim Kit for your Mustang.

Ultra-thin Aluminum. The thinnest on the market. About as thick as card-stock. Overlaid with plastic.
All dash trims kits created in USA by MimoUSA with fine quality material and 3M Adhesive tape.
Precise fit, 100% Accurate Smooth Laser Cutting, and Ultraviolet drying.
Comes with easy to read Installation Instructions and everything you need to install it.
15-Days money back guarantee and lifetime warranty. Restrictions apply.
Black-Lite compatibility (Install a black lite over the dash trim and it will give off a black-lite effect.)

Ford Mustang Aluminum Dash Trim Kit 87-93

High Quality, extra flexible Vinyl Dash Trim Kit for your Mustang.

Ultra-thin Aluminum. The thinnest on the market. About as thick as card-stock. Overlaid with plastic.
All dash trims kits created in USA by MimoUSA with fine quality material and 3M Adhesive tape.
Precise fit, 100% Accurate Smooth Laser Cutting, and Ultraviolet drying.
Comes with easy to read Installation Instructions and everything you need to install it.
15-Days money back guarantee and lifetime warranty. Restrictions apply.
Black-Lite compatibility (Install a black lite over the dash trim and it will give off a black-lite effect.)

Ford Mustang Aluminum Dash Trim Kit 05-08

High Quality, extra flexible Vinyl Dash Trim Kit for your Mustang.

Ultra-thin Aluminum. The thinnest on the market. About as thick as card-stock. Overlaid with plastic.
All dash trims kits created in USA by MimoUSA with fine quality material and 3M Adhesive tape.
Precise fit, 100% Accurate Smooth Laser Cutting, and Ultraviolet drying.
Comes with easy to read Installation Instructions and everything you need to install it.
15-Days money back guarantee and lifetime warranty. Restrictions apply.
Black-Lite compatibility (Install a black lite over the dash trim and it will give off a black-lite effect.)

Yellow Neon Platinum UnderCar Kit Plasmaglow

PlasmaGlow Neon Platinum Under Car Kit
PlasmaGlow Neon Platinum Kit offer exceptional performance at an affordable cost. Each of the 4 tubes has a built-in transformer. With PlasmaGlow Neon Platinum Kit, You will receive the most intense light ever. This is the source to neon kits. These are the kits people use for Auto Shows. You will not get that cheap dim look with this kit. The kit will be so bright not only will it cover the whole underneath of the car, it will cover the outside also.

Kit inludes: 2x54 tubes and 2x38 tubes
Reflective UV mirror strip (for up to 150% more light)
Built-in transformers in every tube / Separate 10000V transformer
All necessary installation hardware for easy installation
High impact durable tubing is 100% waterproof
Lifetime warranty (so you covered from any defects)
Includes an on/off switch.
Available in Blue, Red, Green, Yellow, Aqua, Purple, White & Pink colors

This product ships within 1-5 business days

Express Shipping is available for this item

Yellow LED Wheel-Well Kit Plasmaglow

Are you tired of the limitations of Undercar Kits? Do you wish you could fill in those holes that your wheels make in the overall look of your glow? Check out the all new PlasmaGlow LED Wheel Well Kit! Three LED light bars mount above each wheel to form a complete glow down the sides of your vehicle! LED technology lends it s extreme durability to make this kit possible! Three LED Bars allow ANY spacing configuration, making this kit compatible with any vehicle or motorcycle! Each LED Bar is encased in transparent hardened rubber to withstand the extreme conditions inside your wheel well. Our Lifetime warranty and 2-wire installation keeps installation fast and simple!

This product ships within 1-5 business days

Express Shipping is available for this item

Yellow Cii-LITE Glow Paint Gnxpert

Cii-LITE Glow in the Dark Paint

Gnxpert Color Cii-LITET product is a photon manipulating particles. It works as a photonic battery to hold cell of light and then release it slowly. It is the achievement of a full color spectrum and different special effects through nano particle blends of non-organic materials. Cii-LITET crystal has a ceramic-metallic piezo structure.Glowing time varies of up to 20 hours depending on the environment and application.

Why buy Cii-LITET instead of glowing paint that is ready to go? Well the cost-per-pound basis is much less expensive for Cii-LITET, than any glow products on market today (almost under 6 times less expensive). Cii-LITET products are better than any other glowing product on market because the particles are much easier to incorporate into any manufacturing processes than many of the additives it replaces. For example the glow paint that you would buy to paint your car is going to be low quality paint, which will fade, peel or crack within time. You need special car paint to paint your vehicle. Using Cii-LITET particles you can mix into any car paint good or state of the art quality such as House of Kolor and have the glowing effect that no other car has.

Unlike the competition, Cii-LITE withstands high-temperature and high-pressure environment (mixing within glass and metals). Cii-LITE is made from non-organic materials, chemically inert and environmentally safe. Cii-LITE is non-bleeding and is available in customized sizes and full color spectrum glowing and reflective effects.

The Cii-LITE is also used in application such as aerosol, reflective aerosol, candles, polymer pellets, ABS plastics, vinyl sheets, metals parts, jewelry, silk screen (fabrics), crystals, highways, signs and much more.

1lbs of mixing Glow Powder (To paint a full size vehicle, 5-6lbs of glow powder is required. 1 Gallon of clear base should be mixed with 1-2lbs of Cii-LITE)
Up to 20 glowing hours
Available glowing colors are Aqua blue, Sky blue,Violet, White, Yellow, Green, Red and Orange.
Full engineering technical support
Step by step mixing instructional video
Manufactured in U.S.A

Watch the Instructional Video

More images and details about Cii-LITET

This product ships within 1-5 business days

XO 7.8' Flip down LCD

XO VISION 7.8"" Flip down Wide Screen High Resolution TFT LCD

Advancing the technology in any vehicle has only proved to experience multiple advantages. Whether you"re upgrading your vehicle with our XO Vision 7.8" Flip-Down Wide Screen High Resolution TFT LCD Monitor for interior design, for entertainment purposes or even for the kids, this product has never failed at becoming an instantaneous consumer favorite. Our demand rates and positive consumer feedback proves to us that this LCD Monitor has the highest potential to excel and exceed.

Multi-function credit card remote
On screen display adjustment
Ceiling mount with angle right/left 60 degree
Monitor has up down 180 degree function
Adjustable function
Overhead flip down universal mounting

This product ships within 1-12 business days

XO 6.8' Flip down LCD

XO Vision 6.8"" Flip down TFT LCD Monitor

Advancing the technology in any vehicle has only proved to experience multiple advantages. Whether you are upgrading your vehicle with our XO Vision 6.8" Flip-Down Flat LCD Monitor for interior design, for entertainment purposes or even for the kids, this product has never failed at becoming an instantaneous consumer favorite. Our demand rates and positive consumer feedback proves to us that this LCD Monitor has the highest potential to excel and exceed.

Credit card sized remote control
Overhead console bracket
Viewing angle adjustable to 45 degree left/right
OSD function control
Built in twin door lights
Universal console installation
1 year warranty

This product ships within 1-12 business days

XO 10.4' Flip down LCD

XO VISION 10.4"" TFT LCD

Advancing the technology in any vehicle has only proved to experience multiple advantages. Whether you are upgrading your vehicle with our XO Vision 10.4" TFT Flip-Down Flat LCD Monitor for interior design, for entertainment purposes or even for the kids, this product has never failed at becoming an instantaneous consumer favorite. Our demand rates and positive consumer feedback proves to us that this LCD Monitor has the highest potential to excel and exceed.

640x480 high resolution
NTSC/PAL auto switching
Viewing area: 210(w)x160(h)mm
Dual composite video inputs
2 stereo audio signal inputs
Dimensions: 295(w)x250(h)x50(t)mm
Includes credit card sized remote control
On screen display system
Roof mounting type for mobile video
Space saving ultra thin universal console installation
One year warranty

This product ships within 1-12 business days

Wood TView 7' Flip down LCD

TView ULTRA THIN 7"" High Resolution TFT LCD

Advancing the technology in any vehicle has only proved to experience multiple advantages. Whether you are upgrading your vehicle with our TView Ultra Thin7: High Resolution TFT LCD Monitor for interior design, for entertainment purposes or even for the kids, this product has never failed at becoming an instantaneous consumer favorite. Our demand rates and positive consumer feedback proves to us that this LCD Monitor has the highest potential to excel and exceed.

TFT Active Matrix 7" diagonal Picture Screen 16:9 Ratio
Ultra High 1440x480 Resolution
PAL and NTSC Auto Select
Dot Pitch: 0.107(H)x 0.732(V)
Color Configuration: Stripe
Brightness Rating: 370 cd/m
Contrast Ratio: 150
Number Of Pixels: 691,200
Power Consumption: 700Ma(Max) / 10W(Max)
Dimensions: 176(W) x 129(H) x 28(D) mm
Weight: 0.8 KGS
12volt power (+/- 15%)
Composite Video Signal 1.0V P-P/75 Ohms
Back Light: Built In CCFT
Veiwing Angle L/R/T/B 55/55/15/35
Universal Roof / Dash Mounting System
2 RCA Video Inputs for TV DVD VCR More
Controls: Power/Color/Bright/Volume
On Screen Display
Remote Control
Comes in 3 Colors

This product ships within 1-12 business days

Without Remote Control Fuzion Undercar Multi-LED

Fuzion Under Car Multi-LED Kit( 64-Million colors)

2x48" tubes for the sides and 2x36" tubes for the front and rear
Features new flat LED technology with brigher and clearer LED bulbs
Built-in transformers in each tube to simplify installation
Pre-connected wires
One control box
Comes with all necessary installation hardware, instructions.
Remote control Available

This product ships within 1-5 business days

Express Shipping is available for this item

With Remote Control Fuzion Undercar Multi-LED

Fuzion Under Car Multi-LED Kit( 64-Million colors)

2x48" tubes for the sides and 2x36" tubes for the front and rear
Features new flat LED technology with brigher and clearer LED bulbs
Built-in transformers in each tube to simplify installation
Pre-connected wires
One control box
Comes with all necessary installation hardware, instructions.
Remote control Available

This product ships within 1-5 business days

Express Shipping is available for this item

White Neon Platinum UnderCar Kit Plasmaglow

Kit inludes: 2x54 tubes and 2x38 tubes
Reflective UV mirror strip (for up to 150% more light)
Built-in transformers in every tube / Separate 10000V transformer
All necessary installation hardware for easy installation
High impact durable tubing is 100% waterproof
Lifetime warranty (so you covered from any defects)
Includes an on/off switch.
Available in Blue, Red, Green, Yellow, Aqua, Purple, White & Pink colors

This product ships within 1-5 business days

Express Shipping is available for this item

White LED Wheel-Well Kit Plasmaglow

Ford Mustang Vinyl Eyelids 87-93 - Color: Chrome

Specific:

Vinyl Headlight Eyebrows
Eyelids install with adhesive on top of the headlight housing of the car. It gives a sporty and aggressive look to the car.

Brand new designed to fit every vehicle uniquely.
Eyelids are not universal, they are pre-cut to fit exact vehicles year and model.
Designs are measured with CNC technology for perfect accuracy.
Eyelids are cut with state-of-the-art Computerized Smooth 100% Accurate Laser Cutting Technology. All manufacturing procedures are supervised by professional engineers.
Sold as pair

WHAT IS THE DIFFERENCE BETWEEN TYPES OF EYELIDS

Vinyl - Sticker type base product, which is very thin. Installs very easily and produces great results. Recommended to great excellent results for low cost. This product is installed with adhesive on the back of the eyelids.
Polyurethane - Glossy polyurethane plastic. Works like a sticker but is thicker and more durable. It looks more like a 3D shape then flat shape. This product is installed with adhesive on the back of the eyelids.
Carbon Fiber - Glossy real 3D carbon fiber. Has a 3D shape to it, real carbon fiber grain. Matches great with carbon hoods or a black car. This product is installed with adhesive on the back of the eyelids.

Note: Eye lids manufactured upon order. It might take 5-12 business days to ship out this product

This product ships within 1-12 business days

Express Shipping is available for this item

Ford Mustang Vinyl Eyelids 87-93 - Color: Blue

Specific:

Vinyl Headlight Eyebrows
Eyelids install with adhesive on top of the headlight housing of the car. It gives a sporty and aggressive look to the car.

Brand new designed to fit every vehicle uniquely.
Eyelids are not universal, they are pre-cut to fit exact vehicles year and model.
Designs are measured with CNC technology for perfect accuracy.
Eyelids are cut with state-of-the-art Computerized Smooth 100% Accurate Laser Cutting Technology. All manufacturing procedures are supervised by professional engineers.
Sold as pair

WHAT IS THE DIFFERENCE BETWEEN TYPES OF EYELIDS

Vinyl - Sticker type base product, which is very thin. Installs very easily and produces great results. Recommended to great excellent results for low cost. This product is installed with adhesive on the back of the eyelids.
Polyurethane - Glossy polyurethane plastic. Works like a sticker but is thicker and more durable. It looks more like a 3D shape then flat shape. This product is installed with adhesive on the back of the eyelids.
Carbon Fiber - Glossy real 3D carbon fiber. Has a 3D shape to it, real carbon fiber grain. Matches great with carbon hoods or a black car. This product is installed with adhesive on the back of the eyelids.

Note: Eye lids manufactured upon order. It might take 5-12 business days to ship out this product

This product ships within 1-12 business days

Express Shipping is available for this item

Ford Mustang Vinyl Eyelids 87-93 - Color: Black

Specific:

Vinyl Headlight Eyebrows
Eyelids install with adhesive on top of the headlight housing of the car. It gives a sporty and aggressive look to the car.

Brand new designed to fit every vehicle uniquely.
Eyelids are not universal, they are pre-cut to fit exact vehicles year and model.
Designs are measured with CNC technology for perfect accuracy.
Eyelids are cut with state-of-the-art Computerized Smooth 100% Accurate Laser Cutting Technology. All manufacturing procedures are supervised by professional engineers.
Sold as pair

WHAT IS THE DIFFERENCE BETWEEN TYPES OF EYELIDS

Vinyl - Sticker type base product, which is very thin. Installs very easily and produces great results. Recommended to great excellent results for low cost. This product is installed with adhesive on the back of the eyelids.
Polyurethane - Glossy polyurethane plastic. Works like a sticker but is thicker and more durable. It looks more like a 3D shape then flat shape. This product is installed with adhesive on the back of the eyelids.
Carbon Fiber - Glossy real 3D carbon fiber. Has a 3D shape to it, real carbon fiber grain. Matches great with carbon hoods or a black car. This product is installed with adhesive on the back of the eyelids.

Note: Eye lids manufactured upon order. It might take 5-12 business days to ship out this product

This product ships within 1-12 business days

Express Shipping is available for this item

Ford Mustang Third Brake Light 99-04

Specific:

MimoUSA LED Third Brake Light

This L.E.D Third Brake Light from is a fast and easy way dress up your car or truck. In just minutes you can replace your boring stock 3rd brake light with this head-turning L.E.D Third Brake Light.

Installation is as easy as removing your vehicle"s stock third brake light, unplug it from the stock wiring, plug in your pre-wired L.E.D Third Brake Light, replace the screws (in the stock location) and you"re done.

Quick and easy installation
Direct bolt-on using factory plugs
No cutting, splicing or wiring, simply plug and go
Powerful super bright L.E.D"s
Durable polycarbonate lens

This product ships within 1-5 business days

Ford Mustang Third Brake Light 94-98

Specific:

MimoUSA LED Third Brake Light

This L.E.D Third Brake Light from is a fast and easy way dress up your car or truck. In just minutes you can replace your boring stock 3rd brake light with this head-turning L.E.D Third Brake Light.

Quick and easy installation
Direct bolt-on using factory plugs
No cutting, splicing or wiring, simply plug and go
Powerful super bright L.E.D"s
Durable polycarbonate lens

This product ships within 1-5 business days

Ford Mustang Sonar Euro Tail Lights 99-04

Specific:

Sonar Lighting Euro Tail Lights
to be added

This product ships within 1-5 business days

Ford Mustang Sonar Euro Tail Lights 96-98

Specific:

Sonar Lighting Euro Tail Lights
to be added

This product ships within 1-5 business days

Ford Mustang Sonar Euro Tail Lights 94-95

Specific:

Sonar Lighting Euro Tail Lights
to be added

This product ships within 1-5 business days

Ford Mustang Sonar Euro Tail Lights 05-08

Specific:

Sonar Lighting Euro Tail Lights
to be added

This product ships within 1-5 business days

Ford Mustang Smoke Altezza Taillights 94-98

Specific:

MimoUSA Smoke Altezza Taillights

Enhance the style of your car with a set of brand new smoke altezza taillights. Were you planning to tint your taillights after you got them? With the new smoke altezza taillights, it is already done for you. Professionally tinted taillight glass will make your car look straight from the import scene.

Direct Plug and Play bolt-on on part
New high quality JDM version taillights
Designed as direct bolt-on replacement parts
Perfect fitment and no modification required
Water and shock resistant
Make and Model Specific
100% brand new
Complete set includes left and right side

This product ships within 1-5 business days

Ford Mustang Smoke Altezza Taillights 87-93

Specific:

MimoUSA Smoke Altezza Taillights

Direct Plug and Play bolt-on on part
New high quality JDM version taillights
Designed as direct bolt-on replacement parts
Perfect fitment and no modification required
Water and shock resistant
Make and Model Specific
100% brand new
Complete set includes left and right side

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Paintable; Tint: Yellow

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Paintable; Tint: Smoke

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Paintable; Tint: Red

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Paintable; Tint: Pink

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Paintable; Tint: Green

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Paintable; Tint: Clear -

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Paintable; Tint: Blue

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Carbon Fiber; Tint: Yell

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Carbon Fiber; Tint: Smok

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Carbon Fiber; Tint: Red

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Carbon Fiber; Tint: Pink

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Carbon Fiber; Tint: Gree

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Carbon Fiber; Tint: Clea

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 99-04 - Style: Carbon Fiber; Tint: Blue

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Paintable; Tint: Yellow

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Paintable; Tint: Smoke

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Paintable; Tint: Red

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Paintable; Tint: Pink

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Paintable; Tint: Green

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Paintable; Tint: Clear -

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Paintable; Tint: Blue

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Carbon Fiber; Tint: Yell

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Carbon Fiber; Tint: Smok

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Carbon Fiber; Tint: Red

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Carbon Fiber; Tint: Pink

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Carbon Fiber; Tint: Gree

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Carbon Fiber; Tint: Clea

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang SLR Mirrors 94-98 - Style: Carbon Fiber; Tint: Blue

Specific:

Euro SLR Style Side View Mirror w/ Dual LED

Dual 5.5" long LED signal lights
Impact resistant ABS construction
Anti-glare tinted glass
Manual or Powered operation
Direct OEM fitment
Paintable Surface

This product ships within 1-5 business days

Ford Mustang Seibon Carbon Fiber Doors 05-08

Specific:

SEIBON CARBON FIBER DOORS & DOOR PANELS

Have you ever heard of too much Carbon Fiber? Well, according to Seibon, more Carbon Fiber only advances your vehicle to a point of upgrade perfection. By releasing their new Carbon Fiber Doors, Seibon has proved to us that anything is possible. Besides using only the highest quality resources, each door is manufactured to perfection with its custom machinery.

Custom OEM Fitment
Highest-Grade Carbon Fiber
High Modulus Carbon Weaves
Satisfaction Guaranteed
Lightweight and Strong

This product ships within 1-12 business days

Ford Mustang Sarona Design Body Kit 87-93 - 003 - Full Kit

Specific:

Sarona Design Body Kits

Sarona is one of the newest and most rapidly expanding body kit companies in the industry. From body kits to stylish fender flares, Sarona has accomplished a distinctive style and presentation with all their products. Their strong approach to their manufacturing and design perspectives has placed them on the automotive accessory map.

Their strong dedication and contribution to their products have helped them accomplish an endless streak of success in their visits to automotive shows. Recently, Sarona took their concepts to the New York Auto Show in the Jacob Javits Center where the responses and feedback they received was absolutely tremendous. Even the representatives at the company said that it exceeded their expectations.

Most automotive accessory manufacturers in the industry have limited the selection of accessories for certain car manufacturers that they will design and actually produce. Sarona has decided that they would eliminate this stereotype by not allowing themselves to narrow their product selection for a limited number of car manufacturers. Their variety is diversified with various mixtures of body kits, fender flares, spoilers, wings, etc. Whether you have a racing coupe or just an ordinary sedan, Sarona is almost guaranteed to carry a stylish new addition for your vehicle. Beyond their wide variety, their vigorous testing procedures and top-quality products ultimately certifies them as one of the most reliable and dependable companies in the industry.

Sarona has emphasized their research and development team to create pioneering designs at great values so that no consumer will be left unsatisfied. Feel the thrill of Sarona today and discover what all the hype is about!

High-Quality Body Kits and Accessories
Large Variety for Most Car Manufacturers
Original Designs and Modern Styles
Grade-A Qualified and Certified Products
Satisfaction Guaranteed

This product ships within 1-12 business days

Ford Mustang Putco Tail Light Cover 05-08

Specific: also fits GT

Putco Chrome Trim Tail Light Covers

Dramatically enhances the look of the Tail Light.
Applications to fit the most popular vehicles
Made of an Automotive Grade ABS Chrome.
Installs easily with pre-applied Red 3M! Tape, simple peel and stick.
No cutting or drilling required.
Long lasting material designed to withstand the rigors of the elements.
Matches OEM Chrome perfectly.
Add our new Chrome Door Handles, Mirror, and Head Lamp covers to complete the look.
Priced Right!! No other product on the market like it.

This product ships within 1-5 business days"

Ford Mustang Putco Punch Bumper Grille 05-08

Specific:

Putco Punch Bumper Grilles - Stainless Steel

Mirror finish NeveRust! Stainless Steel.
Installs OVER the existing truck manufacturer""s grille.
Heavy gauge design.
Putco""s NeveRust!" Stainless Steel Lifetime Warranty.
NO DRILLING, CUTTING, or removal of any grille components required.
Hex-key tool included for simple installation.
Stainless Steel hardware.
Applications available for most full-size trucks and SUV""s.
PRICED RIGHT!!!

This product ships within 1-5 business days"

Ford Mustang Putco Mirror Cover 05-08

Specific: also fits GT

Putco Chrome Trim Mirror Covers

Putco Chrome Mirror Covers are the fastest route to eye-popping gleam
Specialized injection-molded shape assures Putco Chrome Mirror Covers fit closely with the contour of your stock mirrors
Putco Chrome Mirror Covers use generous chrome plating over automotive-grade ABS that withstands the elements and matches factory trim
The durable chrome plating on Putco Chrome Mirror Covers won t yellow or rust like metal trim pieces
Putco Chrome Mirror Covers install in just minutes over your stock mirror housing just peel the adhesive backing, press into place and hit the road
Pre-applied 3M adhesive and the included promoter solution form a strong bond with the factory ABS that lasts
Sold in matching pairs for your specific model
Your Putco Chrome Mirror Covers carry a Lifetime Warranty

Dramatically enhance the look of your mirrors and perfectly match the rest of your vehicle s trim! Putco Chrome Mirror Covers do both with ease, offering a smooth and brilliant shine to the back of otherwise dull side views.

Crafted from automotive-grade ABS with a durable chrome plating, Putco Chrome Mirror Covers are tough enough to handle all of the abuse your mirrors take: tossed rocks, pounding weather and exploded bugs. And, the bright chrome plating will never yellow like a steel cover.

With a custom-molded shape, Putco Chrome Mirror Covers pop over the back of your stock housings in seconds without needing to remove any parts. Your Chrome Mirror Covers stay in place with pre-applied, heavy-duty 3M adhesive tape that holds tight to a cleaned surface.

So pop a little limited-edition style onto your mirrors it takes just minutes with Putco s Chrome Mirror covers. Best yet, your set of Putco Chrome Mirror Covers carries a Lifetime Warranty.

This product ships within 1-5 business days

Ford Mustang Putco Fuel Door Cover 05-08

Specific:

Putco Chrome Trim Fuel Door Cover

Made of Automotive Grade ABS Chrome; long lasting material designed to withstand the rigors of the elements.
Matches OEM Chrome perfectly.
Installs via pre-applied Red 3M! tape.
All parts are no drilling, no cutting, and easily intalled in seconds!
Complete the Chrome look by adding, Mirror, Head Lamp, and Tail Light Covers.
Priced Right!!! No other product on the market like it.
Putco quality at a competitive price.

This product ships within 1-5 business days"

Ford Mustang ProX Taillights Cover 94-98 - Yellow [prox-89530]

Specific:

ProX Headlight and Taillight Protection Laminate Covers

We are proud to offer a line of colored headlight and taillight laminate covers. The laminates are all UV resistant and extremely high quality. The Laminate Film Covers give your lights a distinctive character, function as well as providing an excellent lens protection all at the same time. Designed and manufactured to not affect optical clarity. You will not visually notice any difference in beam pattern with the laminate covers applied. Protect your lighting from debris, rocks, gravel, salt, insects and mild contacts and give your vehicle the tipping point with the colored laminate covers.

The laminate covers also easily fix hazy lenses, cracked lenses, rock chips and sand blasting. Protect any high impact or easily damageable area with the invisible, strong, safe, pliable, adhesive-backed laminate covers. UV resistant, guaranteed not to yellow or crack. The laminate covers are excellent for racing or heavy abuse applications.

The average cost of replacement head lamps and fog lamps spiraling to nearly $300, it is nice to know that there is a product available to protect your car against the perils of the open road. Our Laminate Covers were originally tested under the harshest of circumstances with amazing results. Both in the real world and in the lab, our covers have proven that they will withstand a barrage of 1" diameter stones (about 1oz.) at speeds up to 120 m.p.h. with no damage to the lens they protect.

Bubble Free
Strong and UV resistant
Invisible
Impact Resistant
Variety
UV Stabile
Pliable
Unique
5 Year Warranty
Easy Installation
Scratch-resistant, urethane material coupled with the strongest optically clear 3M! adhesive available.
Kit includes - roll enough to cover headlight / taillight application, razor knife, squeegee, glove, bondo card, detailed installation instructions.

Installation Instructions

Note: May not be legal in all states. Please check your local DOT regulations before purchasing this product.

This product ships within 1-5 business days"

Ford Mustang ProX Taillights Cover 94-98 - Yellow [prox-89501]

Specific:

ProX Headlight and Taillight Protection Laminate Covers

Bubble Free
Strong and UV resistant
Invisible
Impact Resistant
Variety
UV Stabile
Pliable
Unique
5 Year Warranty
Easy Installation
Scratch-resistant, urethane material coupled with the strongest optically clear 3M! adhesive available.
Kit includes - roll enough to cover headlight / taillight application, razor knife, squeegee, glove, bondo card, detailed installation instructions.

Installation Instructions

Note: May not be legal in all states. Please check your local DOT regulations before purchasing this product.

This product ships within 1-5 business days"

Ford Mustang ProX Taillights Cover 94-98 - Yellow [prox-89176]

Specific:

ProX Headlight and Taillight Protection Laminate Covers

Bubble Free
Strong and UV resistant
Invisible
Impact Resistant
Variety
UV Stabile
Pliable
Unique
5 Year Warranty
Easy Installation
Scratch-resistant, urethane material coupled with the strongest optically clear 3M! adhesive available.
Kit includes - roll enough to cover headlight / taillight application, razor knife, squeegee, glove, bondo card, detailed installation instructions.

Installation Instructions

Note: May not be legal in all states. Please check your local DOT regulations before purchasing this product.

This product ships within 1-5 business days"

Ford Mustang ProX Taillights Cover 94-98 - Smoke [prox-89530]

Specific:

ProX Headlight and Taillight Protection Laminate Covers

Bubble Free
Strong and UV resistant
Invisible
Impact Resistant
Variety
UV Stabile
Pliable
Unique
5 Year Warranty
Easy Installation
Scratch-resistant, urethane material coupled with the strongest optically clear 3M! adhesive available.
Kit includes - roll enough to cover headlight / taillight application, razor knife, squeegee, glove, bondo card, detailed installation instructions.

Installation Instructions

Note: May not be legal in all states. Please check your local DOT regulations before purchasing this product.

This product ships within 1-5 business days"

Ford Mustang ProX Taillights Cover 94-98 - Smoke [prox-89501]

Specific:

ProX Headlight and Taillight Protection Laminate Covers

Bubble Free
Strong and UV resistant
Invisible
Impact Resistant
Variety
UV Stabile
Pliable
Unique
5 Year Warranty
Easy Installation
Scratch-resistant, urethane material coupled with the strongest optically clear 3M! adhesive available.
Kit includes - roll enough to cover headlight / taillight application, razor knife, squeegee, glove, bondo card, detailed installation instructions.

Installation Instructions

Note: May not be legal in all states. Please check your local DOT regulations before purchasing this product.

This product ships within 1-5 business days"

Ford Mustang ProX Taillights Cover 94-98 - Smoke [prox-89176]

Specific:

ProX Headlight and Taillight Protection Laminate Covers

Bubble Free
Strong and UV resistant
Invisible
Impact Resistant
Variety
UV Stabile
Pliable
Unique
5 Year Warranty
Easy Installation
Scratch-resistant, urethane material coupled with the strongest optically clear 3M! adhesive available.
Kit includes - roll enough to cover headlight / taillight application, razor knife, squeegee, glove, bondo card, detailed installation instructions.

Installation Instructions

Note: May not be legal in all states. Please check your local DOT regulations before purchasing this product.

This product ships within 1-5 business days"

Ford Mustang ProX Taillights Cover 94-98 - Red [prox-89530]

Specific:

ProX Headlight and Taillight Protection Laminate Covers

Bubble Free
Strong and UV resistant
Invisible
Impact Resistant
Variety
UV Stabile
Pliable
Unique
5 Year Warranty
Easy Installation
Scratch-resistant, urethane material coupled with the strongest optically clear 3M! adhesive available.
Kit includes - roll enough to cover headlight / taillight application, razor knife, squeegee, glove, bondo card, detailed installation instructions.

Installation Instructions

Note: May not be legal in all states. Please check your local DOT regulations before purchasing this product.

This product ships within 1-5 business days"